Strength tests were performed to reveal the failure mechanisms of spot weld in lap-shear and cross tension test samples. It is shown the while the lap-shear (cross tension) sample is subjected to shear (normal) load at the structural level the failure mechanism at the spot weld is tensile (shear) mode at the materials level. Based on the observed failure mechanism, stress distribution is assume...

an important concern in rock mechanics is non-homogeneity as joints or fault. adopting the joints as fractures, fractures are well known for their effects on the mechanical and transport properties of rock. it has been postulated that through fractured/jointed rock, mainly, the polygons turned to the shear vector (ti) are involved in the mobilization of shear resistance. consequently, in order ...

because it is not possible to recognize the mechanism of cantilever failure in field studies, this type of common failure in riverbanks is investigated in the laboratory. for this purpose, two samples of susceptible soil that forms an overhanging block in riverbanks are used for physical model tests to determine their physical, chemical and mechanical characteristics. soil blocks of different d...

Adiabatic shear localization is a catastrophic failure mechanism which can occur in ductile metals under high strain rate loading. This mechanism is driven by a thermal instability process in which rapid temperature rise due to plastic work couples with thermal softening to cause uniform deformation to collapse into narrow bands of intense shear within which material ductility is exhausted. Adi...

This paper presents a methodology for the assessment of ductility and strength capacities in low-rise buildings. This method utilizes the characteristics of force-displacement for the lowest story level or considers the weakest story in any given low-rise building for its primary analysis. Calculations are based on two levels of earthquake motions, namely strong earthquakes (PGA=0.3 g), and ver...