In this work, the effect of rock bolt angle on the shear behavior of Rock Bridges is investigated using the particle flow code in two dimensions (PFC2D) for three different Rock Bridge lengths. Firstly, the calibration of PF2D is performed to reproduce the gypsum sample. Then the numerical models with the dimensions of 100 mm * 100 mm are prepared. The Rock Bridge is created in the middle of th...

in this paper, after collecting the rock samples from eight mines and one high way slope, the tests for determination of dry density, uniaxial compressive strength, tensile strength (brazilian test), elastic modulus, schmidt hammer rebound number have been done on samples. in addition, in order to calculating the mean size of rock grains, quartz content, hardness and abrasivity, a thin sections...

------------------------------------------------------Abstract---------------------------------------------------------Estimation of strength properties (uniaxial compressive and point load) from physical properties (density, porosity and rebound hardness) of shale rock type from Kogi State, Nigeria was investigated. The shale rock types were sampled and tested for their properties through in-s...

This paper deals with the statistical analysis of the uniaxial compressive strength and of the elastic modulus of jointed rock masses under different confining pressures. Properties of the rock masses with different joint fabric, with and without gouge have been considered in the analysis. A large amount of experimental data of jointed rock masses from the literature has been compiled and used ...

Point load testing is used to determine rock strength indexes in geotechnical practice. The point load test apparatus and procedure enables economical testing of core or lump rock samples in either a field or laboratory setting. In order to estimate uniaxial compressive strength, index-to-strength conversion factors are used. These factors have been proposed by various researchers and are depen...

The Geological Strength Index (GSI) system, proposed in 1995, is now widely used for the estimation of the rock mass strength and the rock mass deformation parameters. The GSI system concentrates on the description of two factors, rock structure and block surface conditions. The guidelines given by the GSI system are for the estimation of the peak strength parameters of jointed rock masses. The...

Original scientific paper To analyse the influence of joint angle, number and spacing on the strength and acoustic emission (AE) characteristics of rock mass, the uniaxial compression model of rock specimens was established using the micro particle flow PFC2D software platform. The intact rock parameters were determined via trial and error, joints with different angles, numbers and spacing were...

In this paper, after collecting the rock samples from eight mines and one high way slope, the tests for determination of dry density, Uniaxial Compressive Strength, tensile Strength (Brazilian Test), elastic modulus, Schmidt hammer rebound number have been done on samples. In addition, in order to calculating the mean size of rock grains, quartz content, hardness and abrasivity, a thin sections...

rock slope stability depends very much on the strength features of the rock and the geometrical and strength characteristics of the discontinuities (e.g., roughness, wall strength and persistence). since a rock mass is not a continuum, its behavior is dominated by such discontinuities as faults, joints and bedding planes. also, rock slope instability is a major hazard for human activities and o...

Loss of stress support caused by hydrate dissociation may result in a significant reduction of rock strength. The strength of a hydrate-bearing sedimentary formation is a function of the strengths of inter-granular bonds and the interactions between the rock grains and the hydrates in the pore space. Myriads of such bonds and interactions define the macroscopic rock strength parameters. We expe...