This study is concerned with vortex-induced vibration (VIV) of deepwater marine risers. Riser response measurements from model tests on a densely instrumented long, flexible riser in uniform and sheared currents offer an almost ideal set-up for our work. Our objectives are two-fold: (i) we use the measured data to describe complexities inherent in riser motions accompanying VIV; and (ii) we dis...

This paper investigates the integrated riser/vessel system which is subjected to random waves. Riser pipelines are the main components of the oil and gas offshore platforms. Whereas Iran country has been located on the fringes of Caspian Sea deep water, therefore study and research in this area is increasingly essential. The fluctuation of floating production causes the severe response and grea...

In recent years, the production of oil and gas has been developed in deep water depths which exceed 500m. Deep water developments are being followed strongly in different parts of the world (Caspian Sea, Gulf of Mexico, etc.). The movement of floater causes severe stress at the touchdown point (TDP) in steel catenary risers (SCR). The main objective of this study was to simulate the exact behav...

Long flexible cylinders (e.g. risers, tendons, mooring lines) exposed to the marine environment encounter ocean currents leading to vortex-induced vibration (VIV). These oscillations, often driven at high frequencies over extended periods of time may result in structural failure of the member due to fatigue damage accumulation. Recent developments in instrumentation and installation of data acq...

Risers are considered vital parts on fluidized catalytic cracking (FCC) conversion units. It is inside the riser that the heavy hydrocarbon molecules are cracked into petroleum fractions such as gasoline and liquefied petroleum gas (LPG). A simplified kinetic flow model in combination with the Tank-In-Series model was used to predict the conversion response of an FCC riser to changes in feed te...

With high international oil price, the exhaustion of onshore resources and declination of oil and gas production in shallow sea, deep water has become the important succeeding area of worldwide oil and gas. During deepwater oil and gas development, riser must be used to isolate seawater, circulate drilling fluid, and compensate the heaving movements of the string and so on. However, with the op...

The optimal design of risers for castings has been the subject of numerous investigations and this paper determines the optimal dimensions when Chvorinov’s rule for solidification is obeyed by both the riser and casting and solidification time is the only constraint involved .This problem can be formulated to minimize the riser volume subject to the constraint that the riser solidification time...

A steel catenary riser (SCR) attached to a floating platform at its upper end encounters fluctuations in and near its touchdown zone (TDZ), which causes the interaction with the seabed. Subsea surveys and the analysis of SCR’s indicated that the greatest stress and highest damage occurred near the touchdown point (TDP), where the SCR first touches the seabed. Nowadays, the linear seabed spring ...

Now a days, significant amount of aluminium alloy are being used to fabricate components such as engine blocks, cylinder heads, suspension control arms, wheels and pistons. In response to consumer demands for the increase in performance, the use of aluminium has grown dramatically in the recent years. So in order to produce a sound LM6 (Al-12%Si) Aluminium alloy casting, a new approach is made ...

A brief review of recent literature on riser design is presented and a concise description of the design process is given. Effects of hydrodynamical design parameters on marine flexible riser design are then reviewed. Riser dynamic analyses are described which substantiate design criteria for the selection of riser configuration in deep and shallow water. The results of dynamic analyses using c...