Cold rolling of austenitic stainless steel results in increase of residual stresses, hardness, and tensile strength and dislocation density. We have studied the response of eddy current impedance to austenitic change, hardness and its lift off phase in stainless steels during cold reductions. A series of samples of austenitic stainless steel alloys were cold rolled and found that only percentag...

κ-carbide hardening in a ferrite-austenite duplex low-density FeMnAlC steel has been investigated as a function of annealing processing within the temperature range 500−900 o C. Below 600 o C, a high hardness can be attained by the fine microstructures, e.g. the thin lamellar κ-carbides in austenite and dispersed nanosized particulate κ-carbides in ferrite. After further annealing, the alloy so...

In the present work, the nanostructured bainitic microstructures were obtained at the surfaces of a carburized steel and a high-C steel. The rolling contact fatigue (RCF) performances of the two alloy steels with the same volume fraction of undissolved carbide were studied under lubrication. Results show that the RCF life of the carburized nanostructured bainitic steel is superior to that of th...

Cryogenic treatment (CT) is the supplementary process to conventional heat treatment process in steels, by deep–freezing materials at cryogenic temperatures to enhance the mechanical and physical properties of materials being treated. Cryogenic treatment (CT) of materials has shown significant improvement in their properties .Various advantages like increase in hardness, increase in wear resist...

Impact testing methodology is findings the applications for determining the impact strength of the different materials. Oneof the most important characteristics of structural steels, toughness is assessed by the Charpy V-notch impact test. The objective of the research was to maximize the impact toughness by selecting various combinations of Charpy Impact test parameters. In this paper, experim...

In this paper effect of cryogenic treatment on mechanical properties of cold work tool steels at various combination of heat treatment cycle (process sequence) are studied. The material selected for these processes are AISI D2 and D3.Cryogenic treatment is commonly referred as cryotreatment, is an add-on process to the conventional heat treatment of tool steel. Cryogenic treatment improves hard...

Taking the discrete degree of bearing raceway grinding surface integrity as research object, orthogonal test based on wheel speed, workpiece speed and depth is designed. The residual stress, retained austenite, hardness, modified layer thickness roughness after were measured, mean value standard deviation these indexes calculated. results show that stress decreases with increase hardness keeps ...

Crystallographic reconstruction of parent austenite grain boundaries from the martensitic microstructure in a wear resistant steel was carried out using electron backscattered diffraction (EBSD). The present study mainly aims to investigate the parent austenite grains from the martensitic structure in an as-rolled (reference) steel sample and samples obtained by quenching at different cooling r...