نتایج جستجو برای: Refractory Corrosion
تعداد نتایج: 89067 فیلتر نتایج به سال:
Although the flash smelting technologies use different furnace designs, the refractory linings are exposed to very similar aggressive environments and, as a result, the corrosion analysis results on one type of furnace could be generally applied to other furnaces of similar high temperature processes. Particularities regarding the different chemistries of the pyrometallurgical process and opera...
Abstract: Dolomite based refractories are widely used in Iranian steelmaking plants. In the present research, wear and corrosion of refractories used in steel-making converter lining in Esfahan Steel Company was studied. Post-mortem analysis of refractories clarified that the wear started with oxidation of carbon followed by chemical corrosion. Iron oxide from slag reacted with calcia, resu...
The corrosion behavior of three sorts of refractories based on alumina-graphite were studied by immersion tests. The melts included smelting reduction molten slag and corresponding carbon saturated molten iron. The influence of test temperature, FeO content in slag and specimen rotative velocity on the corrosion rate of refractories was examined. By means of SEM and EDS, the microstructure chan...
Penetration and dissolution mechanisms are reviewed for predominantly single-phase oxide, two phase oxide and oxide-carbon composite refractories by liquid silicate slags. Theoretical models of these processes, as well as static (sessile drop, dipping and crucible) and dynamic (rotating finger and rotary slag) experimental tests, along with their practical limitations are considered. Direct (co...
The major objective in glass tank melters is to optimize the entire process by reducing the maximum temperature of melting, improving refractory performance and/or improving melter fuel efficiency. The required characteristics of refractories used in melters are: thermal shock resistance, corrosion resistance, controlled expansion behavior, low thermal conductivity, and adequate creep resistanc...
In order to improve the corrosion resistance of aluminosilicate refractories by molten aluminum, alkaline fluoride NaF and cryolite Na3AlF6 powders were studied. Both physical and chemical properties are known to influence wetting and corrosion behavior. This paper devoted to determine the influence of alkaline fluoride and cryolite added to andalusite based castable on the reaction with a...
thermal barrier coatings (tbcs) are used to provide thermal insulation to the hot section components of gas turbines in order to enhance the operating temperature and turbine efficiency. hot corrosion and thermal shocks are the main destructive factors in tbcs which comes as a result of oxygen and molten salt diffusion into the coating. in this thesis atmospheric plasma spraying was used to dep...
nowadays, magnesia carbon refractories are very important for the iron and steel industries. it is dueto their unique properties, such as low wet ability with melt iron and steel. therefore, it is importantto extend the life of the refractory. in this research, the effect of calcined alumina and nano carbon onmechanical strength and corrosion resistance against slag in magnesia carbon refractor...
one of the most commonly used techniques to reduce the corrosion rate of rebar in concrete is addition substances named corrosion inhibitors into the concrete. corrosion inhibitor is chemical compounds that were added to concrete to prevent corrosion of steel in concrete. sodium nitrate is a type of anodic inhibitors that this study investigatesthe effect of this inhibitor on the properties of ...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید