This paper aims to investigate the energy saving and carbon reduction performance of cross-laminated timber residential buildings in the severe cold region of China through a computational simulation approach. The authors selected Harbin as the simulation environment, designed reference residential buildings with different storeys which were constructed using reinforced concrete (RC) and cross-...

This paper focused on energy consumption and carbon emission for heating and cooling during a building’s operation stage, and examined the energy effects of using Cross Laminated Timber (CLT) as an alternative building material to reinforced concrete (RC) in China’s 31 key cities located in different climate zones. The authors designed two seven-story residential buildings, which were construct...

Strengthening of the existing seismically deficient reinforced concrete (RC) buildings is an important issue in earthquake prone regions. Addition of RC shear wall as infill or external walls into the structural system has been a commonly preferred strengthening technique since the Big Erzincan Earthquake occurred in Turkey, 1992. The newly added rigid infill walls act primarily as shear walls ...

Damage status of RC buildings is greatly influenced by the characteristics of the imposed ground motion. Peak Ground Acceleration and frequency contents are considered the main two factors that affect ground motion characteristics; hence, affecting the seismic response of RC structures and consequently their damage state. A detailed investigation on the combined effects of these two factors on ...

The relationship between the ground motion intensity measure (IM) and the engineering demand parameter (EDP) is analysed in the paper so as to identify and define the most efficient EDP-IM relationships for RC high-rise buildings. A 30-story RC high-rise building with the core wall structural system was selected as the reference building. 240 nonlinear time-history analyses were conducted for 6...

The recent re-assessment of the seismic hazard in Europe led for many regions of low to moderate seismicity to an increase in the seismic demand. As a consequence, several modern unreinforced masonry (URM) buildings, constructed with reinforced concrete (RC) slabs that provide an efficient rigid diaphragm action, no longer satisfy the seismic design check and have been retrofitted by adding or ...

As more and more emphasis is being laid on non-linear analysis of RC framed structures subjected to earthquake excitation, the research and development on both non-linear static (pushover) analysis as well as nonlinear dynamic (time history)analysis is in the forefront. Due to prohibitive computational time and efforts required to perform a complete nonlinear dynamic analysis, researchers and d...

The seismic evaluation of existing buildings is a more troublesome assignment than the design new buildings. need for becomes necessary to know level structural damage and how cure it due earthquakes. shows structure’s behavior under loads determines ultimate capacity structure, there are several methods used in assessment analysis which may be static or dynamic. In this study, an educational b...

Recent advances in the development of a wave travel time methodology for earthquake damage detection in buildings, for use in rapid assessment of structural health following an earthquake, are reviewed. Its main advantages over the modal methods are the insensitivity to the effects of soil-structure interaction, local nature, and robustness when applied to real structures and strong earthquake ...

In emergency scenarios, immediate reconnaissance efforts are necessary. These efforts often take months to complete in full. While underway, building occupants are unable to return to their homes/businesses, and thus, the impact on the society of the disaster-stricken region is increased. In order to mitigate the impact, researchers have focused on creating a more efficient means of assessing t...