Wood shortages, environmental pollution and high energy consumption remain major obstacles hindering the development of today's pulp and paper industry. Energy-saving and environmental friendly pulping processes are still needed, especially for non-woody materials. In this study, soda-oxygen pulping of bagasse was investigated and a successful soda-oxygen pulping process for bagasse at 100 °C w...

Comparative study on organosolv pulping method have been done by using various mixtures of water and organic solvents as delignifying agents including ethylene glycol-water mixtures, ethanol-water mixtures and acetic acid-water mixtures to extract cellulose from agricultural crop biomass (Oil palm empty-fruit bunches-OPFB). The yield of organosolv pulping with ethylene glycol-water mixture, eth...

soda and soda-aq pulping of corn stalk applying different charges of active alkali and pulping time was studied. the average value of fiber length, diameter and cell wall thickness were measured as 1.03 mm, 23.64 µm and 5.26 µm, respectively. the content of alcohol-acetone extractives, cellulose, lignin, extractives soluble in 1% naoh and ash content of corn stalk were determined as 15%, 51.2%,...

In this study, multifunctional alkaline pulping was suggested to produce different pulp grades at one mill site, ranging from high-yield paper pulp to high-purity dissolving pulp. In all process modifications, sulfur was successfully replaced by anthraquinone. Autohydrolysis and alkaline pre-extraction were applied to Eucalyptus globulus wood chips, followed by kraft and soda-AQ pulping. Alkali...

The anatomical structure and chemical composition of the stem-wall material of giant reed is considered from the viewpoint of raw material characterization for industrial fiber production. The effect of stem morphology (nodes and internodes) on pulping results and general pulp properties is discussed. The advantages of application of modern organic solvent based (organosolv) pulping technologie...

Green liquor ( GL ) was used as a sulfide rich liquor to impregnate Southern pine wood chips in a pretreatment step for kraft pulping. A central composite experimental design was applied to investigate relationships between pretreatment conditions, chemical absorption, pulping selectivity, and primary pulp qualities. The derived equations provided a correlation between the independent cooking v...

The extraction of hemicelluloses prior to pulping is an attractive process to be incorporated in the pulp and paper mills to generate valuable by-products such as xylose and xylo-oligomers in addition to core products. This paper investigates the impact of xylan extraction by dilute acid on cooking conditions, pulp yield and properties during kraft and soda-AQ pulping of Eucalyptus grandis wood...

This study investigates the requirements for modeling of acid sulfite pulping with regard to the recovery of cooking chemicals, especially SO2. Such a model has to predict the temporal change of SO2 distribution on solid, liquid and gaseous phase in the digester throughout the whole pulping process, dependent on the pulping parameters: total SO2, free SO2, liquor-towood ratio, temporal temperat...

An ultrasound-assisted extraction (UAE) method using ethanol was applied for extracting arabinogalactan (AG) and dihydroquercetin (DHQ) simultaneously from larch wood, as a pretreatment for pulping and papermaking. The extraction parameters were optimized by a Box-Behnken experimental design with the yields of AG and DHQ as the response values. Under optimum conditions (three extractions, each ...

The extraction of hemicelluloses, which otherwise would be wasted in the black liquor, can be integrated with chemical pulping processes in a biorefinery approach that will generate a sugar-rich feedstock for production of fuels and chemicals. Extractions of hemicelluloses from sugarcane bagasse under dilute sulphuric acid or mild alkaline conditions were performed, using a central composite ex...