sulfonated poly (ether ether ketone) (speek) with a low degree of sulfonation (ds = 40%) was prepared for proton exchange membrane fuel cells (pemfc). poly (ether ether ketone) (peek) was sulfonated in concentrated h2so4 under n2 atmosphere and characterized by the hydrogen nuclear magnetic resonance (h-nmr) technique. after preparation of the speek polymer, the obtained polymer was dissolved i...

in the current work, graphene oxide (go) samples were prepared at room temperature from graphite flakes using a modified hummer's method to produce metal-free electrocatalysts. the effect of the duration of the oxidation process on the structural, chemical and physical characteristics of the go samples was evaluated using x-ray diffraction (xrd), fourier transform infrared spectroscopy (ftir), ...

in this paper the role of super paramagnetic iron oxide nanoparticles (spi) on platinum nanoclusters on activated carbon (pt/c) for electrocatalytic oxygen reduction reaction was considered. four composites of pt/c and super paramagnetic iron oxide nanoparticles were prepared with the same total composites weight and different loading of pt/c (1.2, 0.6, 0.4 and 0.3 mg ). the composite attached ...

reduced graphene oxide film was synthesized on a glassy carbon electrode by electro reduction of graphene oxide powders in aqueous solution. then platinum nano particles were deposited on reduced graphene oxide film that was deposited on the glassy carbon electrode via electro reduction of platinum salt. the physical morphology of the platinum on reduced graphene oxide film was evaluated by sca...

proton exchange membrane fuel cells (pemfcs) are electrochemical devices that show the highest power densities compared to the other type of fuel cell. in this work, nanocomposite membranes used for proton exchange membrane fuel cells as poly(vinyl alcohol)/la2ce2o7 (pva-lc) with the aim of increasing the water uptake and proton conductivity. glutaraldehyde (ga) was used as cross linking agent ...

Proton exchange membrane fuel cells (PEMFCs) are electrochemical devices that show the highest power densities compared to the other type of fuel cell. In this work, nanocomposite membranes used for proton exchange membrane fuel cells as poly(vinyl alcohol)/La2Ce2O7 (PVA-LC) with the aim of increasing the water uptake and proton conductivity. Glutaraldehyde (GA) was used as cross linking agent ...

Maximum Power Point (MPP) tracker has an important role in the performance of fuel cell (FC) systems improvement. Tow parameters which have effect on the Fuel cell output power are temperature and membrane water. So contents make the MPP change by with variations in each parameter. In this paper, a new maximum power point tracking (MPPT) method for Proton Exchange Membrane (PEM) fuel cell is pr...

Distribution of contact pressure between the bipolar plate and gas diffusion layer considerably affect the performance of proton exchange membrane fuel cell. In this regard, an adaptive neuro-fuzzy inference system (ANFIS) is developed to predict the contact pressure distribution on the gas diffusion layer due to dimensional errors of the bipolar plate ribs in a proton exchange membrane fuel ce...

Sulfonated polyether ether ketone (SPEEK) is categorized in a nonfluorinated aromatic hydrocarbon proton exchange membrane (PEM) group and considered as a suitable substitute for common per-fluorinated membranes, such as Nafion, due to wider operating temperature, less feed gas crossover, and lower cost. Since modeling results in a better understanding of a phenomenon, in this study a dynamic o...

output characteristics of fuel cells are affected by a large number of parameters such as geometry, dimensions, construction materials and conditions of supplying fluids. in this paper a mathematical model followed by a two-dimensional numerical approach has been presented to study the fuel cell parametrically. effect of oxygen concentration at gas diffusion layer entrance, temperature and pres...