نتایج جستجو برای: Product Formation Model

تعداد نتایج: 2766761  

پایان نامه :وزارت علوم، تحقیقات و فناوری - دانشگاه تربیت مدرس - پژوهشکده مهندسی فرایند 1395

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

Journal: :iranian journal of biotechnology 2013
davood mazaheri seyed abbas shojaosadati

context:in this review, we discuss empirical and stoichiometric models, which have been developed recently in ssf processes and the influence of environmental conditions on the variables of these models. additionally, new studies on modeling of product formation are also mentioned. evidence acquisition:solid-state fermentation (ssf) is recognized as a cheap process for producing many valuable p...

پایان نامه :وزارت علوم، تحقیقات و فناوری - دانشگاه اصفهان - دانشکده علوم 1389

this research concentrates on the lithostratigraphy, biostratigraphy, microfacies and sedimentary environment of the asmari and gachsaran formations at southwest firuzabad. the thickness of the studied section in all 608.95 meters that 220.8 meters belong to the asmari formation and 387.95 meters belong to the gachsaran formation (champe and mol members). in the study area, the asmari formation...

پایان نامه :وزارت علوم، تحقیقات و فناوری - دانشگاه گیلان - دانشکده علوم انسانی 1392

this study investigated how group formation method, namely student-selected vs. teacher-assigned, influences the results of the community model of teaching creative writing; i.e., group dynamics and group outcome (the quality of performance). the study adopted an experimental comparison group and microgenetic research design to observe the change process over a relatively short period of time. ...

پایان نامه :وزارت علوم، تحقیقات و فناوری - دانشگاه تربیت مدرس 1382

‏‎the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...

پایان نامه :وزارت علوم، تحقیقات و فناوری - دانشگاه اصفهان - دانشکده علوم 1390

در این پژوهش به منظور درک سن و محیط رسوبی سازند آسماری در برش کوه شجبیل، شمال غرب یاسوج به ضخامت 375 متر 171 نمونه برداشت گردیده است. سازند آسماری در برش مورد مطالعه با معیارهای سنگ شناختی به سه واحد مشخص تفکیک شده است. این واحد ها با داشتن شمای آهک های مسیو، ضخیم، متوسط و نازک لایه، آهک های نازک لایه ی مارنی و بعضاً مارن مشخص می گردد. در این برش تعداد 18 جنس و 29 گونه از فرامینیفرهای بنتیک شنا...

Journal: :MATEC web of conferences 2021

Based on the analysis of functional capabilities modern information systems, paper substantiates applicability multidimensional combined structures for computer-assistant planning in machinery production. A optimization model has been developed elementary technological surface-treatment routing case using complex quality indicators determined by operational properties products. The dimensions i...

پایان نامه :وزارت علوم، تحقیقات و فناوری - دانشگاه صنعتی اصفهان 1389

run-out-table (rot) is located between last finishing stand and down coiler in a hot strip mill. as the hot steel strip passes from rot, water jets impact on it from top and bottom and strip temperature decreases approximately from 800-950 °c to 500-750°c. the temperature history that strip experience while passing through rot affects significantly the metallurgical and mechanical properties, s...

Journal: :journal of petroleum science and technology 2015
ahmad tavasoli saba karimi rohollah keyaei

the influence of mo particle size on the catalytic activity and product selectivity of alkalized mos2 nanocatalysts has been investigated. nanocatalysts are prepared using a microemulsion technique with water-to-surfactant ratios of 1-12. three different techniques, including xrd, tem, and hydrogen chemisorption were used to determine the molybdenum average particle size and their activity and ...

  Context:In this review, we discuss empirical and stoichiometric models, which have been developed recently in SSF processes and the influence of environmental conditions on the variables of these models. Additionally, new studies on modeling of product formation are also mentioned. <span style="color: windowtext...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید