The increasing importance of powdered materials fabrication has led to an increasing emphasis on the understanding of the powder behavior during compaction. During compaction, a powder mass undergoes densification owing to various mechanisms, i.e. sliding, rotation, deformation and/or fracturing of the constituent particles. These densification mechanisms are very dependent upon the powder char...

Detergent powders are sometimes processed into compact tablets for cleaning purposes based on the advantage of dosage, minimised dusting and packaging its offers over their powder counterpart. The flow-ability greatly influences handling. The particle size within the powder plays a key role on handling, flow-ability and the strength of the produced compact detergent tablet. The Ariel powder use...

In one form of powder methods, the powder is compressed in a die and subsequently sintered. The final dimensions are determined by the powder, die, compaction pressure, and sintering densification cycle. The higher the compaction pressure, the higher the final density and properties. Minimal densification occurs in sintering if the powders are large and the sintering temperature is low. This is...

Compaction characteristic of the surface layer asphalt mixture (13-type gradation mixture) was studied using Superpave gyratory compactor (SGC) simulative compaction tests. Based on analysis of densification curve of gyratory compaction, influence rules of the contents of mineral aggregates of all sizes and asphalt on compaction characteristic of asphalt mixtures were obtained. SGC Tests show t...

The compaction forming of metal powder is a process involving large deformations, large strain, non-linear material behavior and friction. Consequently, the numerical analysis of such a highly non-linear process is a formidable computational problem. In this paper, an ALE technique is presented based on a generalized cap plasticity model in simulation of powder forming processes. In ALE formula...

A new approach in the method of depositing an external lubricant on the die walls of a powder metallurgy press has been developed which allows the compaction of parts from mixes with no or minimal lubricant content. By heating the die to moderate temperatures (70°C 100°C) and using new composite lubricants, optimum thickness lubricant layers can be deposited allowing the compaction-ejection of ...

In powder die compaction, the characteristics of the end product are dictated by the mechanical properties of the powder being processed. A commonly used constitutive model describing the behavior of pharmaceutical powders during compaction is the modifi ed-Drucker Prager Cap (DPC) model. The experiments used to measure DPC parameters are time consuming and, hence, limit the model’s wide-spread...