coni nanowires were deposited by pulsed electrodeposition technique into porous alumina templates. the effect of off time between pulses (toff) and reductive/oxidative time (treduc/oxid) on the microstructure and magnetic properties of the coni nanowires were investigated. maximum coercivity and squareness were obtained for samples fabricated at treduc/oxid= 0.5 ms and toff =400 ms. the coerciv...

Anodic porous alumina has been widely investigated and used as a nanostructure template in various nanoapplications. The porous structure consists of numerous hexagonal cells perpendicular to the aluminum substrate and each cell has several tens or hundreds of nanoscale pores at its center. Because the nanomorphology of anodic porous alumina is limited by the electrolyte during anodizing, the d...

Titanium oxide (TiO2) nanowires were prepared for an electrolytic capacitor application by the automatic dipping technique using a porous alumina template. The automatic dipping technique allows us to exactly control the dipping rate so that we can obtain homogenous infiltration of nanowires in the porous alumina membrane, even though the solution is very acidic. From the TEM, SEM and XRD measu...

We report on the fabrication and morphology/structural characterization of a porous anodic alumina (PAA)/PtSi nano-template for use as matrix in template-assisted Si nanowire growth on a Si substrate. The PtSi layer was formed by electroless deposition from an aqueous solution containing the metal salt and HF, while the PAA membrane by anodizing an Al film deposited on the PtSi layer. The morph...

Porous alumina templates are fabricated by anodization of Al in an acid. The characteristics of the template, such as the pore diameter, interpore separation, and the periodicity of the porous structure depend on the conditions of anodization and the acid that is used as electrolyte. The variation of pore diameter and interpore separation as a function of anodization parameters are described. T...

This study was designed to probe the fabrication of unique silver and gold nano-structures engaging a self-designed chitosan-porous anodic alumina nano-composite as a template. Porous anodic alumina has been manufactured by di-step aluminum anodization in an oxalic acid electrolytic bath. The surface properties of porous anodic alumina were reinforced by chitosan neutralized in sodium hydro...

Latex nanoparticles were packed inside nanometer-thick titania/polymer composite nanotubules templated by porous alumina membrane, to give free-standing particle-in-tubing "micro-beanpods" after removal of the template membrane.

A novel process of fabricating various oxide nanostructures on glass substrates is described. Transparent porous alumina films ( 6–150 nm) were first formed in acid solutions by anodization of aluminum layers sputter-deposited on a glass plate coated with a tin-doped indium oxide film. The porous alumina structures after pore-widened were then used as a host or a template in a sol–gel process t...

Artificial hemoprotein nanotubes have been prepared by a layer-by-layer deposition technique with human serum albumin (HSA) incorporating the synthetic heme (FeP) [HSA-FeP] using an anodic porous alumina template; each of the liberated tubules has a very uniform outer/inner diameter and can reversibly bind dioxygen (O(2)) at 25 degrees C.

Mesoporous templated MCM-48 silica was prepared using a C16 surfactant as template. The MCM-48 powders and thin films were characterized by different techniques. Two types of porous supports were used, namely macroporous α-alumina and silicon microsieves. The supported MCM-48 layers were applied as liquid permeable membranes in pressure-driven nanofiltration and electric field-mediated ion tran...