Engineered aluminum oxide (Al2O3), titanium dioxide (TiO2), and silicon dioxide (SiO2) nanoparticles (NPs) are utilized in a broad range of applications; causing noticeable quantities of these materials to be released into the environment. Issues of how and where these particles are distributed into the subsurface aquatic environment remain as major challenges for those in environmental enginee...

This article contains the datasets obtained from experiments in laboratory related to moisture propagation in building porous materials. The datasets contain moisture measurements and corresponding time measurements during vertical infiltration experiment in brick and limestone samples. Moisture measurements were carried out using a γ-ray device and water volume absorption was recorded by a com...

A core-in-shell sorbent is described herein. The core is reactive to the compounds of interest, and is preferably calcium-based, such as limestone for hot gas desulfurization. The shell is a porous protective layer, preferably inert, which allows the reactive core to remove the desired compounds while maintaining the desired physical characteristics to withstand the conditions of use.

The influence of mineral substrate composition and structure on bacterial calcium carbonate productivity and polymorph selection was studied. Bacterial calcium carbonate precipitation occurred on calcitic (Iceland spar single crystals, marble, and porous limestone) and silicate (glass coverslips, porous sintered glass, and quartz sandstone) substrates following culturing in liquid medium (M-3P)...

In this work the likelihood of asphaltene deposition problems during dynamic displacement of oil by natural gas in unconsolidated porous media is experimentally inspected. The two different rock materials, limestone and sandstone, are used as a representative of porous media. Dynamic flow experiments indicate that the increase of natural gas injection increases asphaltene deposition in the unco...

the cold climate is a favorable parameter for the development of tension cracks and decrease of rock brittleness. therefore, this paper attempts to investigate the hamekasi porous limestone in order to predict the brittleness indices during freeze-thaw cycles. the freeze–thaw test was executed for one cycle including 16 h of freezing, and 8 h of thawing. the geo mechanical properties and brittl...

in this work the likelihood of asphaltene deposition problems during dynamic displacement of oil by natural gas in unconsolidated porous media is experimentally inspected. the two different rock materials, limestone and sandstone, are used as a representative of porous media. dynamic flow experiments indicate that the increase of natural gas injection increases asphaltene deposition in the unco...

In this work the likelihood of asphaltene deposition problems during dynamic displacement of oil by natural gas in unconsolidated porous media is experimentally inspected. The two different rock materials, limestone and sandstone, are used as a representative of porous media. Dynamic flow experiments indicate that the increase of natural gas injection inc...

The micro morphology of limestone sorbent is a key for improving the SO2 removal efficiency in the coal-fired power plant. The tube furnace system was built for imitating the indirect desulfurization reaction in traditional boiler atmosphere (65%N2, 15%CO2, 4.7%O2, 15%H2O, 0.3%SO2) and the direct desulfurization reaction in oxygen-fired atmosphere (80%CO2, 4.7%O2, 15%H2O, 0.3%SO2). The reacted ...

The influence of land-use mosaic among sub-watersheds on coastal processes apply globally to any coastal regions hugged by wetlands and underlain with limestone deposits. The existence of a subterranean flow connecting a tropical backwater to the Arabian Sea through the submerged porous lime shell is indicated from the coastal nutrient distribution. The present investigation represented a nonmu...