Objectives: Metal-ceramic restorations are the standard by which all esthetic restorations are measured. Fracture of dental restorations is a multifactorial problem, which is serious and costly. Debonding of porcelain from metal substructure and the bond strength depend on many factors. The purpose of this study was to determine whether or not the opaque porcelain thickness has a significant ef...

The purpose of the present study was to test the hypothesis that glazing will affect the Weibull modulus or the mean flexural strength of dental porcelain. Four groups (n = 30) of specimens were prepared from feldspathic body porcelain (Vita VMK 68). The specimens were tested in groups: original glazed condition (control), and after grinding separately with 1,000-grit, 600-grit, and 100-grit si...

The wear performances of bovine tooth enamel (BTE) against translucent tetragonal zirconia polycrystals (TZP) compared to that of feldspar porcelain and the influence of surface treatments of translucent TZP were investigated by the two-body wear test. Translucent TZP and feldspar porcelain were used as hemisphere abrader specimens with a radius of curvature of 5 mm; flat BTE surfaces were used...

PURPOSE This in vitro study compared the effect of five different techniques on the surface roughness of feldspathic porcelain. MATERIALS AND METHODS 100 feldspathic porcelain disk samples mounted in acrylic resin blocks were divided into five groups (n=20) according to type of surface treatment: I, hydrofluoric acid (HFA); II, Deglazed surface porcelain treated with Neodymium:yttrium- alumin...

The widespread use of porcelain in restorative dentistry is generally due to its esthetic appearance even though it is brittle. The transverse strength, or modulus rupture, averages around 108 MPa (16,000 psi) for aluminous porcelain and 88 MPa (13,000 psi) for feldspathic porcelain. The tensile strength, as determined by diametral compression, is approximately 29 MPa (4,200 psi) for opaque fel...

PURPOSE Porcelain chipping has been one of the main problems of porcelain-fused-to-zirconia restorations. This study evaluates the bond strengths of layered, pressed, and adhesively bonded porcelain to yttria-stabilized zirconia substrates that have undergone traditional preparation or gas-phase fluorination. MATERIALS AND METHODS A three-point bending test was used to evaluate the bond stren...