At first step polymer optical fibers (POFs) are used in short distance for optical data transmissions. At second step SiO2 nanoparticles were prepared by sonochemical-assisted method. Silica nanoparticles were added to polymer matrix to prepare polymer based nanocomposites. Most of the POF applications are in the medical and electrical devices. There are several methods for fabrication of POFs,...

Here we present the fabrication of a solid-core microstructured polymer optical fiber (mPOF) made of polycarbonate (PC), and report the first experimental demonstration of a fiber Bragg grating (FBG) written in a PC optical fiber. The PC used in this work has a glass transition temperature of 145°C. We also characterize the mPOF optically and mechanically, and further test the sensitivity of th...

We report a characterization of the acoustic sensitivity of microstructured polymer optical fiber interferometric sensors at ultrasonic frequencies from 100kHz to 10MHz. The use of wide-band ultrasonic fiber optic sensors in biomedical ultrasonic and optoacoustic applications is an open alternative to conventional piezoelectric transducers. These kind of sensors, made of biocompatible polymers,...

We successfully obtained a high-bandwidth (1 GHz km) and low-loss (90 dB/km at 0.572 µm of wavelength) graded-index polymer optical fiber by using the interfacial-gel polymerization technique, in which we used an unreactive component to obtain the quadratic refractive-index distribution. This high-bandwidth graded-index polymer optical fiber makes it possible to transmit a high-speed optical si...

Guidance in a liquid core is possible with microstructured optical fibers, opening up many possibilities for chemical and biochemical fiber-optic sensing. In this work we demonstrate how the bandgaps of a hollow core microstructured polymer optical fiber scale with the refractive index of liquid introduced into the holes of the microstructure. Such a fiber is then filled with an aqueous solutio...

In the quest of finding the ideal polymer optical fiber (POF) for Bragg grating sensing, we have fabricated and characterized an endlessly single mode microstructured POF (mPOF). This fiber is made from cyclo-olefin homopolymer Zeonex grade 480R which has a very high glass transition temperature of 138 °C and is humidity insensitive. It represents a significant improvement with respect to the a...

Ageing and degradation has been accomplished on Microstructured Polymer Optical Fiber (MPOF) by changing simulated ambient environmental condition to ascertain their suitability in possible automotive application. Both single Moded Microstructured Polymer Optical Fiber (SM-MPOF) and Graded Index Microstructured Polymer Optical Fiber (GI-MPOF) has been studied for physical ageing and chemical de...

 A polymethylmethacrylate (PMMA) microstructured polymer optical fiber (mPOF) is fabricated and characterized. Using the cut-back technique the fiber loss is measured which is higher than the step-index silica fibers. Through a novel experimental scheme, the backward Stokes spectrum of the fabricated mPOF is recorded over a range exceeding 3000 cm‑1 during the cut-back method and compared ...

A novel fiber-optic sensor assembly for continuous monitoring of moisture over extended subsurface environments, such as road embankments, wall backfills, and landfills is presented. This sensor meets the requirements of subsurface monitoring by distributed measurements over linear positioning of a single fiber. The sensor assembly is composed of a communication optical fiber and a hydrophilic ...