Freezing and thawing resulting from the ingression of water into concrete causes cracking or spalling. Corrosive ions such as chloride or sulfate penetrate the concrete surface and eventually reach the reinforcing steel. This causes the steel to corrode.     Because of the high maintenance and replacement costs, responsible officials should be increasingly concerned about the growing number...

Polymer modified concrete (PMC) consists of Portland cement concrete with a polymer modifier. Its advantages are proper bonding strength to substrate concrete, high tensile and flexural strength and low amount of shrinkage and permeability. Using PMC overlays can be considered as a method for preservation of damaged concrete structures due to their suitable performance and durability. In this r...

Acrylic polymer that is highly stable against chemicals and is a good choice when concrete is subject to chemical attack. In this study, self-compacting concrete (SCC) made using acrylic polymer, nanosilica and microsilica has been investigated. The results of experimental testing showed that the addition of microsilica and acrylic polymer decreased the tensile, compressive and bending strength...

Considering the increasing demand for developing alternative construction materials, due to the growing environmental concerns, this paper discusses the feasibility of alkali activated geo-polymer concrete, as a future construction material. The main objective of this study involves observation of structural behaviours of the fresh fly ash-based geo-polymer concrete, understanding the basic mix...

Currently, reuse of solid waste from disused infrastructures is an important environmental issue to study. In this research, polymer concrete was developed by mixing orthophthalic unsaturated polyester resin, artificial microfillers (calcium carbonate), and waste aggregates (basalt and limestone) coming from the recycling process of concrete sleepers. The variation of the mechanical and physica...

The potential of recycled waste polymeric materials as a substitute for aggregates in concrete has been investigated in the study. Two different types of waste polymer, namely polyurethane formaldehyde (PUF) based packaging waste and high density polyethylene (HDPE) were recycled and used in the experiment. Concrete and masonry poly block specimens were prepared using recycled polymer materials...

Being well recognized in repair, rehabilitation and maintenance of concrete structures, polymer modified concretes are new high-performance materials. The present study was focused on the availability and use of polymer-modified concrete under local conditions in Pakistan. Various polymer compositions with subsidiary chemicals were prepared in the laboratory, and their feasibility in the repair...

Polymer concrete, a composite material in which the binding material is some type of polymer, is being used more widely in the construction industry. Polymer concretes can also contain steel reinforcing rebars; therefore, the rate of adhesion between polymer concrete and reinforcing steel must be determined. Our study investigated the extent and behaviour of adhesion in the case of reinforcing ...

Polymer concrete (PC) is a composite material in which the binder consists entirely of a synthetic organic polymer. It is variously known as synthetic resin concrete, plastic resin concrete or simply resin concrete. Because the use of a polymer instead of Portland cement represents a substantial increase in cost, polymers should be used only in applications in which the higher cost can be justi...

one important application of fiber reinforced polymer (frp) is to confine concrete as frp jackets in seismic retrofit process of reinforced concrete structures. confinement can improve concrete properties such as compressive strength and ultimate axial strain. for the safe and economic design of frp jackets, the stress-strain behavior of frp-confined concrete under monotonic and cyclic compress...