Fused deposition modeling (FDM) is a rapidly growing 3D printing technology. However, printing materials are restricted to acrylonitrile butadiene styrene (ABS) or poly (lactic acid) (PLA) in most Fused deposition modeling (FDM) equipment. Here, we report on a new high-performance printing material, polyether-ether-ketone (PEEK), which could surmount these shortcomings. This paper is devoted to...

In tribological applications, because of the corrosive problems of the metals in water applications, poly-ether-ether-ketone (PEEK) and its composites are preferred for rubbing materials. As it is known PEEK is a high performance semi-crystalline thermoplastic polymer and has received significant attention in recent years. This is due to its high mechanical strength and elastic modulus, high to...

Poly(ether ether ketone) with cardo group-based (PEEK-WC) membranes, in hollow fber (HF) confguration, were prepared via the dry-wet spinning technique through the phase inversion process and used to clarify kiwifruit juice. The depectinised juice was processed according to a batch concentration confguration in selected operating conditions (transmembrane pressure, 1.6 ...

Solid alkaline fuel cell is employed by polymer anion exchange membrane (AEM) that is permeable to hydroxide ion. A number of polymers have been proposed for AEM which include polysulfone (PSF), poly (phenylene oxide) (PPO), and poly (ether ether ketone) (PEEK). The purpose of this paper was to conduct a critical review on the development of PEEK polymer as AEM, particu...

sulfonated poly (ether ether ketone) (speek) with a low degree of sulfonation (ds = 40%) was prepared for proton exchange membrane fuel cells (pemfc). poly (ether ether ketone) (peek) was sulfonated in concentrated h2so4 under n2 atmosphere and characterized by the hydrogen nuclear magnetic resonance (h-nmr) technique. after preparation of the speek polymer, the obtained polymer was dissolved i...

The effects of surface modifications of multi-walled carbon nanotubes (MWCNTs) on their dispersibility in different solvents and poly (ether ether ketone) (PEEK) have been studied. MWCNTs were treated by mixed acids to obtain acid-functionalized MWCNTs. The acid-functionalized MWCNTs were modified with six different chemical agents separately, 1,6-diaminohexane, hexadecyl trimethyl ammonium bro...

Poly-ether-ether-ketone (PEEK) is a widely used and versatile polymer. Here, we use ellipsometry to determine the wavelength-dependent optical properties of PEEK before after surface modified by plasma immersion ion implantation (PIII), technique that renders hydrophilic bio-active. Lorentz Gaussian oscillator models are fit data for extraction constants dielectric function. The effect PIII, ev...

INTRODUCTION Concerns regarding UHMWPE wear particle induced osteolysis [1] have led to investigations of alternative bearing materials. Carbon-fibre reinforced poly-ether-ether-ketone (CFR-PEEK) has been shown in animal studies to have a similar biological activity to UHMWPE [2], whilst hip and knee configurations incorporating this polymer display reduced wear rates when compared with convent...