In this research, the effects of torque tightening on the stress distribution in double lap simple bolted and hybrid (bolted-bonded) joints have been investigated numerically. In order to determine the bolt clamping force value due to tightening torque in simple bolted and hybrid joints, which is necessary in numerical simulation, an experimental approach has been proposed. To do so, two kinds ...

As a renewable building material with low embodied energy characteristics, wood has gained more and more attention in the green and sustainable building industry. In terms of material resource and physical properties, scrimber composite not only makes full use of fast-growing wood species, but also has better mechanical performance and less inherent variability than natural wood material. In th...

failure in timber structures occurs mainly in crucial points such as joints areas. therefore, the idea of using composite sheets in timber joints has been intro-duced as a method in order to increase the strength and ductility behaviour of timber joints. this research aims to study the behaviour of bolted joints in poplar and pine woods, which are reinforced by two types of gfrp sheets. a singl...

Expressions were presented which can be used to estimate the strengths of continuous fiber reinforced composite laminates containing pin-loaded holes. The expressions apply to laminates containing either a single pin loaded hole, a single row of pin loaded holes, or two parallel rows of pin loaded holes.

This paper presents a novel bolt-loosening detection technique using image information of bolted joints in steel bridges. Firstly, existing bolt-loosening detection techniques are reviewed and their benefits and limitations are analyzed. Secondly, a bolt-loosening detection algorithm using image processing techniques is newly proposed for bolted joints in steel bridges. It consists of 3 steps: ...

BOG (Boil off Gas) compressor deals with the gas evaporated from the LNG storage tank. Its working temperature is lower than-120℃. There are two types of starting process for BOG compressor: Direct Starting and No-load Starting. During the starting process, the temperature on cylinder will change rapidly and result in additional thermal stress to some parts on the cylinder, especially to the bo...

We present a new technique for identifying the dynamics of bolted joints. The technique relies on the comparison of the overall dynamics of the bolted structure to that of a similar but unbolted one. The di!erence in the dynamics of the two systems can be attributed solely to the joint; modelling this di!erence in the dynamics enables us to construct a non-parametric model for the joint dynamic...

In this study, analytical models considering different material and geometry for ‎both single and double-lap bolted joints were reviewed for better understand how to ‎select the proper model for a particular application. The survey indicades that the ‎analytic models selected for the adhesively single or double bolted lap joints, as well ‎as T, scarf, and stepped joints, with linear material pr...

This paper aims to study the mechanical behaviour and failure mode of Al 2024-T3 in double-lap bolted joints. To accomplish this, the effect of geometric parameters was investigated in both configurations of single and double fasteners. Using ABAQUS/Standard, a three-dimensional finite element model was developed and verified against the experimental results of the joints loaded in tension. In ...

Equivalent stiffness of clamped plates should be prescribed not only to evaluate the strength of bolted joints by the scheme of “joint diagram” but also to make structural analyses for practical structures with many bolted joints. We estimated the axial stiffness and bending stiffness of clamped plates by using Finite Element (FE) analyses while taking the contact condition on bearing surfaces ...