the basic strategy of reduce the ductility demand and related concentrated tensions at moment resistance connections is reduce the section of the beam at connected region to column. by this method plastic hinge done at the reduced cross section and this local reduction decreases the demand of the components of connection. on this basis, in present study a new beam-to-column moment connection wi...

A new plastic hinge integration method overcomes the problems with nonobjective response caused by strain-softening behavior in force-based beam–column finite elements. The integration method uses the common concept of a plastic hinge length in a numerically consistent manner. The method, derived from the Gauss–Radau quadrature rule, integrates deformations over specified plastic hinge lengths ...

high performance fiber reinforced cementitious composite (hpfrcc) materials exhibit strain hardening behavior with multiple cracking under tensile loading. in this paper, experimental and parametric studies are performed to assess the influence of using hpfrcc material instead of normal concrete in reinforced concrete beams. after calibrating the experimental results, the analytical results inc...

To assess the performance criteria of the reinforced-concrete, five-storey residential buildings common in Iran, an experimental study in the structural laboratory of the University of Tehran has been conducted. The test program includes cyclic and monotonic load tests of six beams that represent three-to-five storey buildings with rigid frame structures. Using definitions given in FEMA-356 a...

a parametric study is performed to assess the influence of the tension reinforcement index, ( ω = ρ fy /f bc), and the bending moment distribution (loading type) on the ultimate deformation characteristics of reinforced concrete (rc) beams. the analytical results for 15 simply supported beams with different amounts of tension reinforcement ratio under three different loading conditions are pres...

So far we have assumed that a plastic hinge forms if the bending moment in a critical cross section reaches the plastic limit value, M0. We have tacitly neglected the effect of the other internal forces on the formation of the yield hinge. This effect, however, can be appreciable, for example in multi-storey frames or frames with a large horizontal thrust where the axial forces are large. So, w...

A procedure for efficient three-dimensional nonlinear time-history analysis of steel framed buildings is derived. It incorporates two types of nonlinear beam elements—the plastic hinge type and the elastofiber type—and nonlinear panel zone elements to model yielding and strain-hardening in moment-frames. Floors and roofs of buildings are modeled using 4-node elastic diaphragm elements. The proc...

To assess the performance criteria of the reinforced-concrete, five-storey residential buildings common in Iran, an &#10experimental study in the structural laboratory of the University of Tehran has been conducted. The test program includes cyclic and monotonic load tests of six beams that represent three-to-five storey buildings with rigid frame structures. Using definitions given in FEMA-356...

This paper describes a web-based finite element program called portal of damage. The purpose of the program is the numerical simulation of reinforced concrete framed structures, typically buildings, under earthquakes or others exceptional overloads. The program has so far only one finite element based on lumped damage mechanics. This is a theory that combines fracture mechanics, damage mechanic...

High Performance Fiber Reinforced Cementitious Composite (HPFRCC) materials exhibit strain hardening behavior with multiple cracking under tensile loading. In this paper, experimental and parametric studies are performed to assess the influence of using HPFRCC material instead of normal concrete in reinforced concrete beams. After calibrating the experimental results, the analytical results inc...