The zeta potential magnitude and the duration of its changes have been thought to be directly related to the surface reactivity, the governing of osteoconductivity and availability of valuable information in determining the anticipated in-vivo performance of implants. In this study the zeta potential of plasma sprayed hydroxyapatite (HA) was evaluated in various simulated physiological solution...

Thermal barrier coatings (TBCs) are commonly used to protect gas turbine components from high temperatures and oxidation. Such consist of ceramic top coats metallic bond coats. The mismatch in thermal expansion the coat, coat component material is one main factor leading failure coating system. Columnar-structured offer an enhanced tolerance strain during cycling. On a flat coated surface, thes...

The effects of the bond coat species on the delamination or fracture behavior in thermal barrier coatings (TBCs) was investigated using the yclic thermal fatigue and thermal-shock tests. The interface microstructures of each TBC showed a good condition without cracking or delamination after flame thermal fatigue (FTF) for 1429 cycles. The TBC with the bond coat prepared by the air-plasma spray ...

n air plasma spray process has been used to deposit tri-layer environmental barrier coatings consisting of a silicon bond coat, a mullite interiffusion barrier, and a Yb2SiO5 top coat on SiC substrates. Solidified droplets in as-deposited Yb2SiO5 and mullite layers were discovered to be epleted in silicon. This led to the formation of an Yb2SiO5 + Yb2O3 two-phase top coat and 2:1 mullite (2Al2O...

Article history: Received 18 March 2016 Revised 16 July 2016 Accepted in revised form 28 July 2016 Available online xxxx Photoluminescence piezospectroscopy (PLPS) was used as a non-destructive technique for the measurement of residual stresses within the thermally grown oxide (TGO) layer beneath plasma-spray thermal barrier coatings (TBC). The technique has proved to be very effective for such...

Thermal barrier coatings (TBCs) provide effective thermal barrier to the components of gas turbine engines by allowing higher operating temperatures and reduced cool‐ ing requirements. Plasma spraying, electron-beam physical vapor deposition, and sol‐ ution precursor plasma spray techniques are generally used to apply the TBCs on the metallic substrates. The present article addresses the TBCs f...

Vacuum plasma spraying (VPS) is an industrial technique used to coat substrates with a wide range of materials for numerous applications. Historically, vacuum plasma spraying processes have been open-loop processes with, at most, closed-loop control of the spray parameters. Such processes would benefit from closed-loop control as the issues of process repeatability and coating quality could be ...

conventional and nanostructured ysz coatings were deposited on the in-738 ni super alloy by the atmospheric plasma spray technique. the oxidation was measured at 1100°c in an atmospheric electrical furnace. according to the experimental results the nanostructured coatings showed a better oxidation resistance than the conventional ones. the improved oxidation resistance of the nanocoating could ...

In this article, failure and fracture mechanisms in an aluminum alloy (which has been used in diesel internal combustion engines), with and without ceramic thermal barrier coatings, have been investigated under isothermal and non-isothermal fatigue loadings. In this research, the base material is an aluminum-silicon-magnesium alloy and the thermal barrier coating includes a metallic bond coat l...

in this article, failure and fracture mechanisms in an aluminum alloy (which has been used in diesel internal combustion engines), with and without ceramic thermal barrier coatings, have been investigated under isothermal and non-isothermal fatigue loadings. in this research, the base material is an aluminum-silicon-magnesium alloy and the thermal barrier coating includes a metallic bond coat l...