in the construction process of a plastic concrete cut-off wall, concreting is usually performed using the termie pipe method. in this method, concreting is performed from the lowest point in the excavated trench (containing the slurry) using a funnel and the pipe connected to it. the concrete poured in the funnel gradually settles in the panel through the termie pipe which is beneath the slurry...

in this study prediction of the steady-state flow of branched polymer melts in pipe geometry with finite volume method is presented. our analysis in this study revealed that;for normal-stress tqq , the xpp model can predict this tensor unlike the other viscoelastic models such as ptt or gieskus which can not predict tqq for viscoelastic fluid in two dimensional pipe flows. the fluid is modelled...

Heat transfer from the internal surfaces of a vertical pipe to the adjacent air gives rise to the air flow establishment within the pipe. With the aim of optimizing the convective air flow rate in a vertical pipe, the details of the flow and thermal fields were investigated in the present study. Conservation equations of mass, momentum, and energy were solved numerically using simple implicit f...

Direct numerical simulation of three-dimensional (3D) viscous flow in a wavy pipe is performed using the lattice Boltzmann approach, to study 3D flow features in a curved pipe with nonuniform curvature. We first validate the lattice Boltzmann approach by simulating a transient flow in a straight pipe. In a wavy pipe, it is shown that the pressure gradient necessary to drive the flow depends mor...

in the construction process of a plastic concrete cut-off wall, concreting is usually performed using the termie pipe method. in this method, concreting is performed from the lowest point in the excavated trench (containing the slurry) using a funnel and the pipe connected to it. the concrete poured in the funnel gradually settles in the panel through the termie pipe which is beneath the slurry...

Abstarct: Flow through pipes and heating situations find wide applications in industry. Depending on the fluid properties, temperature field in the pipe changes. This in turn results in thermodynamic irreversibility in the flow system. Thermodynamic irreversibility can be quantified through amount of entropy generation in the thermal system. Consequently, in the present study, the influence of ...

When the velocity of fluid flow in a cantilevered pipe is successively increased, the system may become unstable and flutter instability would occur at a critical flow velocity. This paper is concerned with exploring the dynamical stability of a cantilevered fluid-conveying pipe with an additional linear dynamic vibration absorber (DVA) attachment. It is endeavoured to show that the stability o...

The study of two-phase fluid flow behavior in hydraulic structures such as pressurized flow tunnels, culverts, sewer pipes, junctions and other similar conduits is of great importance. A two-phase mixture flowing in a pipe can exhibit several interfacial geometries such as bubbles, slugs or films, depending on the fluid and hydrodynamic properties of flow. The main variables, giving rise to a v...

This paper concerns the mathematical modelling of flow and solute transport through stormwater ponds. The model is based on appropriate lumped system conservation equations that are solved using standard numerical techniques. The model was used to route a first flush pollution scenario through a cylindrical pond for 16 combinations of elevation and diameter of a submerged pipe outlet, in conjun...

sudden pipe expansions have been known as efficient hydraulic energy dissipaters for a long time. the complex phenomenon of flow separation and velocity discontinuity at the interface of incoming jet and the recirculation flow, results in intensive shear and tensile rupture of the fluid and the associated destructive phenomenon of cavitation. this paper focuses on aeration in sudden pipe expans...