Pervaporation (PV) is a well-established membrane technique used in separation; especially dehydration of organic solvents. Along with other parameters such as permeate pressure and feed temperature; feed composition is an important parameter, which affects separation characteristics and membrane performance in pervaporation. In this paper, the separation characteristics of a hydrophilic polyvi...

Volume Four 5-1 THEORETICAL ANALYSIS OF CONCENTRATION POLARIZATION EFFECT ON VOC REMOVAL BY PERVAPORATION 1S.X. Liu, 2L.M. Vane, and 1M. Peng 1Department of Food Science, Rutgers University, New Brunswick, New Jersey 08901-8520; Phone: (732) 932-9611 X240; Fax: (732) 932-6776; Email: [email protected]. 2Clean Process and Product Division, National Risk Management Research Laboratory, U.S. E...

the effects of operating parameters such as feed temperature and permeate-side pressure on the performance of a commercial pva membrane in the dehydration of toluene by a pervaporation (pv) membrane system is studied in the present work. the results obtained indicate that increasing temperature in the range of 40 to 70 °c and reducing permeate pressure in the range of 1 to 10 mmhg increase memb...

Integrally-skinned asymmetric Polyetherimide/Poly (vinyl alcohol) (PEI/PVA) hollow fber membranes for pervaporation dehydration were fabricated by non-solvent induced phase inversion. PVA inside the PEI matrix could be crosslinked to provide membrane performance stability during long term operation. The effects of different PEI/PVA blend ratio, external coagulant type and...

The aim of this work is to illustrate the structural and parametric optimization of continuous hybrid distillation-pervaporation process with different configurations such as series, parallel, and series-parallel arrangement of pervaporation modules in the pervaporation network, and to propose a generalized methodology for difficult separations. A superstructure representation of hybrid process...

Molecular sieving MFI-type zeolite membranes were prepared by a secondary growth method without using an organic template. Silicalite membranes with intercrystalline pores minimized or eliminated were obtained by this synthesis method which avoids the template removal step. The silicalite membrane exhibits molecular sieving characteristics with pervaporation separation factor for p-xylene to o-...

in the chemical industry, process intensification is needed to meet important goals such as sustainable and eco-friendly processes. for esterification reaction the “produce more with less pollution” objective can be achieved by coupling reaction and separation in a so called integrated process. in this work a model for describing the esterification reaction of ethyl acetate in pervaporation mem...

A mathematical model considering mass and momentum transfer was developed for simulation of ethanol dewatering via pervaporation process. The process involves removal of water from a water/ethanol liquid mixture using a dense polymeric membrane. The model domain was divided into two compartments including feed and membrane. For a description of water transport in ...

In this paper, polydimethylsiloxane (PDMS) composite membranes that were supported using polyvinylidene fluoride (PVDF) microfiltration membrane were developed for the pervaporation (PV) of dimethyl carbonate (DMC) from a methanol solution. Experimental studies on the solubility and the diffusivity of pure DMC and methanol in the membrane were first measured. Higher DMC uptake indicates that th...

mfi zeolite membranes were prepared on porous α-alumina substrates, using secondary growth of nano-seeded layers. the resulting membranes were characterized by means of scanning electron microscopy (sem), x-ray diffractometry (xrd), and pervaporation performance tests for separation of benzene, toluene and xylene (btx) mixture from contaminated water. the morphology, thickness, homogeneity, cry...