A novel palladium promoted Ag/Al2O3 catalyst (denoted Ag-Pd/Al2O3) has been developed for the selective catalytic reduction of NO by C3H6. The Ag-Pd/Al2O3 shows a higher NOx conversion than Ag/Al2O3, especially at the temperatures ranging from 300 to 450 ◦C. The addition of a small amount of Pd (0.01 wt.%) to Ag/Al2O3 is considered to be favorable for the partial oxidation of C3H6. In situ diff...

Atomic layer deposition (ALD) of Al2O3 using trimethylaluminum (TMA) and water on Pd nanoparticles (NPs) was studied by combining in situ quartz crystal microbalance (QCM) measurements, in situ quadrupole mass spectrometry (QMS), and transmission electron microscopy (TEM) with density functional theory (DFT) calculations. TEM images of the ALD Al2O3 overcoated Pd showed conformal Al2O3 films on...

Pd nanoparticles (PdNPs) stabilized by methyl cellulose (MC) were synthesized in an aqueous solution, which are monodispersed nanoparticles. PdNPs/α-Al2O3 catalyst was prepared with monodispersed PdNPs and showed better catalytic performance than Pd/α-Al2O3 catalyst prepared by the incipient wetness impregnation method using Pd(NO3)2 as a precursor. The catalysts were characterized by transmiss...

Five monolithic catalysts with low noble metal content were prepared by immerge method (Pt/gamma-Al2O3, Pt/La-Al2O3, Pt/YSZ-Al2O3, Pt+Pd/La-Al2O3 and Pd/La-Al2O3) and their activity measurements were carried out in a conventional fixed-bed flow reactor. The results show that La-Al2O3 can promote activity of the prepared catalysts and can decrease the complete conversion temperature of cooking f...

The present work is focused on the investigation of the performance and long-term stability of two composite palladium membranes under different operating conditions. One membrane (Pd/porous stainless steel (PSS)) is characterized by a ~10 µm-thick palladium layer on a porous stainless steel substrate, which is pretreated by means of surface modification and oxidation; the other membrane (Pd/Al...

Palladium nanoparticles were grown on sub-millimeter activated Al2O3 particle support by spraying H2PdCl4 solution evenly onto the support, followed with a thermal reduction under H2 atmosphere. Compared with its counterpart created by the conventional impregnation method, the Pd/Al2O3 catalyst created by the spray process could enrich the existence of active Pd nanoparticles on the surface of ...

CO adsorption, NO adsorption and CO þ NO reaction on various Pd model catalysts have been studied using vibrational spectroscopy from ultrahigh vacuum (UHV) up to elevated pressures (B1 bar) and the kinetics of the reaction compared with the conventional high surface area Pd/g-Al2O3 catalysts. The structure sensitivity of the CO þ NO reaction on different Pd surfaces is explained using Pd(111),...

Diesel oxidation catalysts (DOC) were investigated for activity, NO conversion stability, and sulfur poisoning/regeneration on Pd/Al2O3, Pt/Al2O3, Pd-Pt/Al2O3 catalysts. The Pd/Al2O3 catalyst was more active CO hydrocarbon (C3H6 C3H8) oxidation, while the Pt/Al2O3 efficiently oxidized NO. formation of a Pd-Pt alloy in maintained Pd reduced phase, resulting superior activity this CO, C3H6, compa...

An egg-shell Pd/Al2O3 catalyst showed higher activity than a regular Pd/Al2O3 catalyst in the partial oxidation of methane to syngas, but a common problem of this reaction is the catalyst deactivation on stream. We attempted to modify the egg-shell catalyst via impregnation with some metal oxide additives. Although the addition of MgO did not show any beneficial effect, the addition of CaO and/...