Composite steel/concrete beams may buckle in hogging bending regions. As the top flange of I-beam in that arrangement is restricted from any translational deformation and twist, the web will distort during buckling presenting a phenomenon often described as restricted distortional buckling. There are limited studies available in the literature of restricted distortional buckling of composite st...

For this purpose a finite element model specifically developed for the nonlinear analysis of steel-concrete composite beams is adopted. This finite element model includes material nonlinearity of slab concrete, reinforcement steel, beam steel as well as slabbeam nonlinear partial interaction due to the deformable shear connection. The inclusion of the partial interaction in the composite beam m...

geometric and material nonlinear behavior of slender webs in i-column girders having stocky flanges under the action of combined lateral and axial loads is investigated. interaction curves corresponding to the application of compressive and shear loads at buckling and ultimate stages for both web plates and column sections are plotted. in addition, the effects of flange and web slenderness rati...

The interaction between an edge dislocation and a crack in the presence of uniform applied tension and shear is considered. Emphasis is placed on the effects of partial closure and crack-face friction. Representative results are given.

the combination of flexural frame and shear wall is one of the suitable systems to apply in reinforced concrete buildings. the deflections of flexural frame become limited due to the high stiffness of wall and the interaction of these systems. tall buildings even higher than fifty stories can be designed by using frame- wall systems. with respect to special behavior of flexural frame or shear w...

BACKGROUND Partial support, as a novel support mode, has been widely applied in clinical practice and widely studied. However, the precise mechanism of partial support of LVAD in the intra-ventricular flow pattern is unclear. MATERIAL AND METHODS In this study, a patient-specific left ventricular geometric model was reconstructed based on CT data. The intra-ventricular flow pattern under 3 simu...

Experimental investigation of the ultimate resistance of slender, steel-plate girder web panels to combined shear-and-patch loading indicates significant interaction between shear loading and patch loading. However, an existing interaction formula is based on experimental results. Herein, an improved design procedure for slender plate girders subjected to combined shear and patch loading is pro...

large size direct shear tests (i.e.300 x 300mm) were conducted to investigate the interaction between clay reinforced with geogrids embedded in thin layers of sand. test results for the clay, sand, clay-sand, clay-geogrid, sandgeogrid and clay-sand-geogrid are discussed. thin layers of sand including 4, 6, 8, 10, 12 and 14mm were used to increase the interaction between the clay and the geogrid...