In this study, the polyvinylidene fluoride (PVDF) hollow fiber hemodialysis membranes were prepared by non-solvent induced phase separation (NIPS). The influences of PVDF membrane thickness and polyethylene glycol (PEG) content on membrane morphologies, pore size, mechanical and permeable performance were investigated. It was found that membrane thickness and PEG content affected both the struc...

• The air gap effect on PVDF hollow fiber membranes is much more evident for the dope solution with the high PVP concentration than low PVP concentration. • Large macro-voids/cavities in PVDF hollow fiber membranes are suppressed to the finger-like macro-voids and the separation layer is thickened when increasing PVP concentration in dope solution. • The hydrophilicity and viscosity of polymer ...

We aimed to investigate the relationship between membrane material and the development of membrane fouling in a membrane bioreactor (MBR) using membranes with different pore sizes and hydrophilicities. Batch filtration tests were performed using submerged single hollow fiber membrane ultrafiltration (UF) modules with different polymeric membrane materials including cellulose acetate (CA), polye...

polyvinylidene fluoride/polyvinylpyrrolidone (pvdf/pvp) hollow fiber membranes were fabricated by dry-jet wet-spinning process. the correlated effects of the air gap length and pvp concentration ((1) the air gap length effect at the low and high pvp concentration in the dope solutions, as well as (2) the effect of the pvp concentration at the same air gap length) on the cross-section structure ...

in this study, the influence of the salts as an additive on the performance of the membrane was investigated and an extensive work was performed to optimize pvdf hollow fiber membranes through a response surface methodology (rsm). the prepared membranes were characterized by sem, contact angle and lep measurement. then, the rsm was used for the optimization of surface pore size, porosity and hy...

In this study, the influence of the salts as an additive on the performance of the membrane was investigated and an extensive work was performed to optimize PVDF hollow fiber membranes through a response surface methodology (RSM). The prepared membranes were characterized by SEM, contact angle and LEP measurement. Then, the RSM was used for the optimization of surface pore size, porosity and hy...

Polyvinylidene fluoride/polyvinylpyrrolidone (PVDF/PVP) hollow fiber membranes were fabricated by dry-jet wet-spinning process. The correlated effects of the air gap length and PVP concentration ((1) the air gap length effect at the low and high PVP concentration in the dope solutions, as well as (2) the effect of the PVP concentration at the same air gap length) on the cross-section structure ...

a bioreactor equipped with hollow fiber microfiltration membranes was applied for wastewater treatment. removal of chemical oxygen demand (cod) and biochemical oxygen demand (bod5) was investigated. the experimental setup consisted of influent and effluent tanks, and membrane modules using polyvinyl di–fluoride (pvdf) hollow fibers. the operation program included suction and backwash steps whic...

membrane technology is used to separate water or solvents from salts or pollutants. this technique could be used for water treatment. for using of polyether sulfone (pes) hollow fiber membranes in water treatment processes, the pes hollow fiber membranes were prepared by dry-wet spinning method and heated in an oven at: 120°c, 150°c and 180°c. the effect of heating on performance of membranes w...