نتایج جستجو برای: PC-GTAW

تعداد نتایج: 41928  

2012
Y. B. Chen Y. B. Zhao Z. L. Lei L. Q. Li

In order to study the effects of laser induced metal vapour on arc plasma during laser arc double sided welding (LADSW), emission spectroscopy techniques were utilised. The arc plasma in LADSW of 5A06 aluminium alloy was compared with conventional gas tungsten arc welding (GTAW) in this work. The electron temperature and density were estimated by the Saha– Boltzmann equation and the Stark broad...

2012
N. Arunkumar

Evaluation of welding process such as metal inert gas welding and tungsten inert gas arc welding on tensile, bend and hardness properties of austenitic stainless steel SS347H(18Cr 10Ni 1Cb ), T22(21⁄4Cr Mo) and T91(9Cr 1Mo V) grades are studied. Tubes of 54 mm of outer diameter and 4 mm of wall thickness is used as a base material in the following combination SS347H VS T91 and T91 VS T22 is wel...

2016
Sumit Kumar

A literature review of studies and researches has been attempted in the field of dissimilar metal welding. Dissimilar metal welds have numerous industrial applications in area of thermal power generation, chemical, petrochemical, automobile, aerospace industries and nuclear plants etc. The purpose of this paper is to review: (a) Dissimilar metal welds, their Metallurgical and Mechanical aspects...

2013
K. Ashok Kumar Lakshmi Narayana Srinivasa Rao

GAS TUNGSTEN ARC WELDING (GTAW) is the quality weld process. It is preferred welding process for stainless steel, low alloy steel, nickel, cobalt, titanium, aluminum, copper, and magnesium. The present work aims to evaluate the effect of Gas Tungsten Arc Welding process parameters on the quality of the weld bead. The process parameters Welding Current, Wire Diameter, Wire Feed Speed, Ratio of w...

2010
anrong Kong Radovan Kovacevic

In this study, a three-dimensional (3D)finite elementmodel is developed to investigate thermally induced stress field during hybrid laser–gas tungsten arc welding (GTAW) process. In the hybridwelding case, we focus on the GTAWprocess sharing commonmolten poolwith laser beam and playing an augment role in thehybridweldingsystem.Anexperiment-based thermalanalysis isperformedtoobtain the temperatu...

Journal: :Specta 2023

In this paper, the combination of shielded metal arc welding (SMAW) and gas tungsten (GTAW) methods are used in a double V groove SS304 10 mm thick plate. Welding current variation 110A SMAW/120A GTAW, 100A SMAW/130A 90A SMAW/140A GTAW was to observe effect on tensile strength microstructure. Tensile test metallography were performed phenomenon. ImageJ software for microstructure analysis. The ...

2013
Y. C. LIU

The objective of this research is to apply intelligent control methodology to improve weld quality. Based on fuzzy logic and artificial neural network theory, a self-learning fuzzy and neural network control scheme has been developed for real-time control of pulsed gas tungsten arc welding (GTAW). Using an industrial TV camera as the sensor, the weld face width of the weld pool, i.e., the feedb...

2014
Vijay Gautam

This paper aims at optimization of process parameters for gas tungsten arc welding (GTAW) of sheet samples of Aluminium alloy AA1100 using AC wave with Argon as inert gas. Tensile properties of parent and welded specimens were determined as per ASTM-E8M standard. Taguchi approach was applied to determine most influential control parameters which will yield better tensile strength of the joints ...

Journal: :Materials Research-ibero-american Journal of Materials 2023

Gas-Shielded Tungsten Arc Welding (GTAW) was modified to a Flux-Cored-Double-Wire GTAW (FCDW-GTAW); in this technique, wires of different compositions are used simultaneously obtain microstructures. In the GTAW, automatic flux-cored double-wire with combination four deposited AISI1020 steel, allowing Pin-on-disk wear tests described by ASTM G99 evaluate coefficients hardfacing materials combini...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید