The multi-walled carbon nanotubes (CNTs) and reduced graphene oxide (rGO) nanosheets were functionalized with 2-hydroxymethyl thiophene (CNT-f-COOTh) and 2-thiophene acetic acid (rGO-f-TAA) and grafted with poly(3-dodecylthiophene) (CNT-g-PDDT and rGO-g-PDDT) to manipulate the orientation and patterning of crystallized regioregular poly(3-hexylthiophene) (P3HT). Distinct nano-hybrid structu...

P3HT layers with a thickness of ∼5 nm were deposited on bare and TiO2-covered ZnO ripple structures. The ZnO ripples were prepared wet-chemically and a TiO2 layer with a thickness less than 5 nm was prepared by atomic layer deposition. Under humid air and visible light illumination, the oxidation behaviors of P3HT on these surfaces were studied using photoelectron spectroscopy. It was found tha...

Two poly(3-hexylthiophene) (P3HT) macromers containing a donor polymer with a polymerizable methacrylate (MA) end group, P3HT-CH2-MA and P3HT-(CH2)2-MA, have been synthesized, and P3HT-(CH2)2-MA has been successfully homopolymerized and copolymerized with methyl methacrylate (MMA) into stereoregular brush polymers and graft copolymers, respectively, using chiral ansa-zirconocene catalysts. Macr...

Semiconducting organic-inorganic nanocomposites comprising the conjugated polymer poly(3-hexylthiophene) (P3HT) in intimate contact with CdSe nanocrystals were crafted by exploiting rationally designed P3HT-grafted cadmium precursors (i.e., Cd-P3HT complexes). The bifunctional ligand 4-bromobenzyl phosphonic acid (BPA-Br) that possesses two terminal functional groups at each end was employed, e...

In situ and ex situ neutron reflectivity is used to characterize annealed regioregular-P3HT/PCBM bilayers. In situ annealing of a 20 nm PCBM/35 nm P3HT bilayer at 170 °C reveals rapid mixing of PCBM and P3HT to produce a polymer-rich layer that contains around 18–20% PCBM. Samples with three different thicknesses of P3HT layer are ex situ annealed at 140 °C. This again reveals migration of PCBM...

Nanocomposites of poly(3-hexylthiophene)-cadmium selenide (P3HT-CdSe) were synthesized by directly grafting vinyl-terminated P3HT onto [(4-bromophenyl)methyl]dioctylphosphine oxide (DOPO-Br)-functionalized CdSe quantum dot (QD) surfaces via a mild palladium-catalyzed Heck coupling, thereby dispensing with the need for ligand exchange chemistry. The resulting P3HT-CdSe nanocomposites possess a w...

The ordering of poly(3-hexylthiophene) (P3HT) molecules in dilute P3HT/chloroform solutions was accelerated by adding small amounts of concentrated H2SO4. The concentrated H2SO4 stimulates the nucleation of crystals, which controls the overall rate of P3HT crystallization. Dispersed nuclei spur P3HT solution crystallization, and adsorbed nuclei induce P3HT crystallization on substrates. By AFM,...

The post-functionalization of poly(3-hexylthiophene) (P3HT) via various synthetic routes is reported. Well-defined and monofunctionalized ω-thiol-terminated P3HT, ω-carboxylic acid-terminated P3HT, ω-acrylate-terminated P3HT, and ω-methacrylate-terminated P3HT are obtained in high yields through a straightforward procedure. From those, different novel P3HT-based graft copolymers are synthesized...

Processing and manipulation of highly conductive pristine graphene in large quantities are still major challenges in the practical application of graphene for electric device. In the present study, we report the liquid-phase exfoliation of graphite in toluene using well-defined poly(3-hexylthiophene) (P3HT) to produce a P3HT/graphene composite. We synthesize and use regioregular P3HT with contr...

A method that enables the formation of a rough nano-scale surface for conjugated polymers is developed through the utilization of a polymer chain ordering agent (OA). 1-Chloronaphthalene (1-CN) is used as the OA for the poly(3-hexylthiophene-2,5-diyl) (P3HT) layer. The addition of 1-CN to the P3HT solution improves the chain ordering of the P3HT during the film formation process and increases t...