Nickel-molybdenum oxidebimetallic nanoparticles were synthesized in ethylene glycol using the microwave irradiation technique. According to the results, successive reduction of nickel and molybdenum ions, followed by thermal treatment of obtained nanoparticles led to formation of core-shell structured nickel-molybdenum oxide nanoparticles. According to the results, the thickness of the s...

Nickel and aluminum powders were mechanically alloyed with 10 or 30 vol.% refractory metal powders (molybdenum or tungsten) for times up to 50 h. Intermetallic synthesis takes place after lo-20 h alloying, with concomitant dispersion of the inert refractory metal phase, resulting in an NiAl matrix containing fine refractory dispersoids. The reactive synthesis step is direct, without intermediat...

A nickel alloy with high chrome and molybdenum content was found to form a highly resistive and passive oxide layer. The donor density and mobility of ions in the oxide layer has been determined as a function of the electrical potential when alkaline water layers are on the alloy surface in order to account for the relative inertness of the nickel alloy in corrosive environments.

Ammonia (NH3) is produced from atmospheric nitrogen and hydrogen from a hydrocarbon source. Natural gas is the most commonly used hydrocarbon feedstock for new plants; other feedstocks that have been used include naphtha, oil, and gasified coal. Natural gas is favored over the other feedstocks from an environmental perspective. Ammonia production from natural gas includes the following processe...

Auger Electron Spectroscopy (AES) has been used to study the surface compositions of three types of nickel based chromium alloys. These alloys are IN600, IN601 and C22. AES analysis indicated the presence of chromium and oxygen on their surfaces. The formation of this chromium oxide surface layer, 3 nm thick, provides excellent corrosion resistance. For alloy C22, no molybdenum was indicated on...

Molybdenum disulfide (MoS2)-based materials have been recently identified as promising electrocatalysts for hydrogen evolution reaction (HER). However, little work has been done to improve the catalytic performance of MoS2 toward HER in alkaline electrolytes, which is more suitable for water splitting in large-scale applications. Here, it is reported that the hybridization of 0D nickel hydr(oxy...

Sucrose hydrogenolysis is industrially important for the production of polyols. To provide high glycerol yield under milder reaction conditions, a nickel catalyst promoted by Molybdenum and copper supported on kieselguhr was synthesized and optimized using Response Surface Methodology. A 3X5 experimental design has been adopted to study the effect of these constituents. A linear second-order mo...

O-Functionalised salen ligands were employed as bridging ligands in the synthesis of homo- and heterometallic salen complexes with early and late transition metals (H(2)salen: N,N'-bis(salicylidene)ethylenediamine, systematic name: 2,2'-{ethane-1,2-diylbis(nitrilomethylidine)}diphenol). A new type of O-functionalised salen ligand was synthesised, which contains alkyl groups to enhance the solub...

Nickel–molybdenum (Ni–Mo) materials are widely used functional oxide catalysts for the hydrogen evolution reaction. In this work, we investigate the high activity of Ni–Mo by depositing size-controlled Ni nanocrystals (NCs) onto Mo substrates. We observe a synergistic increase in catalytic activity that does not scale with the Ni–Mo interface length. This evidence points to a bulk electronic in...

Waste metals in the form of metal oxide (hydroxide) sludges are generated in significant amounts by the metal finishing industries, and their accumulations pose problems for disposal and challenges for recycle. The availability of technically feasible efficient separations of metals such as nickel, cobalt, chromium, cadmium, copper, tin, zinc, lead, manganese, molybdenum, and titanium from plat...