The hexagonal zinc oxide coated nickel (Ni/ZnO) nanostructure photocatalyst has successfully been prepared by the reduction of nickel chloride hexahydrate using hydrazine hydrate through the solvothermal process at 140 °C followed by surface modification of the product by the reflux method at 110 °C for 1 h. The X-ray diffraction (XRD) pattern showed that the 'as prepared' sample consists of fa...

The search for above room temperature ferromagnetism in dilute magnetic semiconductors has been intense in recent year. Arrays of perpendicular ferromagnetic nanowire/rods have recently attracted considerable interest for their potential use in many areas of advanced nanotechnology. We report a simple low-temperature chemical vapor deposition (CVD) to create self-assembled comb-like Ni-/undoped...

In the present study, ZnO nanostructure has been synthesized by different methods, namely coprecipitation, hydrothermal and sonochemical methods. After comparison of the morphology and photocatalytic activity of ZnO samples prepared via different methods, the best method (sonochemical method) was used for synthesis of Ni-ZnO nanoparticles with different concentrations of nickel. Furthermore, st...

A modified hydrothermal method was developed to synthesize ZnO-CuO composite nanostructures. A free-standing film made of ZnO-CuO nanostructures was assembled on the surface of the hydrothermal solution with a smooth surface on one side and a spherical surface on the other side. The structure, growth mechanism and the optical properties of the composite nanostructures were studied. Structural c...

We demonstrate the morphological control method of ZnO nanostructures by atomic layer deposition (ALD) on an Al2O3/ZnO seed layer surface and the application of a hierarchical ZnO nanostructure for a photodetector. Two layers of ZnO and Al2O3 prepared using ALD with different pH values in solution coexisted on the alloy film surface, leading to deactivation of the surface hydroxyl groups. This ...

We have developed a simple solid–vapor approach for controlled growth of the tetraleg ZnO nanostructure at high yield. The length of the tetraleg is 2–3 mm and the edge size of its centering nucleus is 70–200 nm. Our electron microscopy study gives the first direct evidence about the existence of the octahedral multiple twin nucleus, which is confirmed to be responsible for the formation of the...

In this study, a non-selenized CuInGaSe2 (CIGS) solar device with textured zinc oxide (ZnO) antireflection coatings was studied. The ZnO nanostructure was fabricated by a low-temperature aqueous solution deposition method. With controlling the morphology of the solution-grown tapered ZnO nanorod coatings, the average reflectance of the CIGS solar device decreased from 8.6% to 2.1%, and the ener...

Fabrication of ZnO nanostructure via direct patterning based on sol-gel process has advantages of low-cost, vacuum-free, and rapid process and producibility on flexible or non-uniform substrates. Recently, it has been applied in light-emitting devices and advanced nanopatterning. However, application as an electrically conducting layer processed at low temperature has been limited by its high r...

This paper reports the effect of the different deposition methods towards the ZnO nanostructure crystal quality and film thickness on the polyimide substrate. The ZnO film has been deposited by using the spray pyrolysis technique, sol-gel and RF Sputtering. Different methods give a different nanostructure of the ZnO thin film. Sol gel methods, results of nanoflowers ZnO thin film with the thick...

Flower-like ZnO nanostructures were synthesized by decomposing Zn(OH)2 in 1,4- butanediol at 105 °C for 36 h. Size of flower-like ZnO nanostructure can be controlled by pH of the aqueous solution. In the preparation of flower-like ZnO nanostructure, zinc nitrate was used as a precursor. The morphology and microstructure of flower-like ZnO nanostructure have been characterized by scanning electr...