The non-sulfided Ni-PTA/Al2O3 catalyst was developed to produce green diesel from the hydroprocessing of Jatropha oil. The Ni-PTA/Al2O3 catalyst was prepared by one-pot synthesis of Ni/Al2O3 with the co-precipitation method and then impregnanting Ni/Al2O3 with PTA solution. The catalysts were characterized with BET, SEM-EDX, TEM, XRD, XPS, TGA and NH3-TPD. The Ni and W species of the Ni-PTA/Al2...

Ni/Al2O3, Co/Al2O3 and bimetallic Ni(Co)/Al2O3 catalysts were prepared using an impregnation method and employed in CO2 dry reforming of methane under coking-favored conditions. The spent catalysts were carefully characterized using typical characterization technologies and inelastic neutron scattering spectroscopy. The bimetallic catalyst exhibited a superior activity and anti-coking performan...

A simple and efficient Pd/Al2O3-NR-RD catalyst was prepared by depositing palladium on a shape controllable Al2O3-NR support through a two-step process that involves hydrothermal synthesis of Al2O3-NRs followed by reductive-deposition of palladium. This catalyst showed high activity in the catalytic formylation of amines by CO2-H2 under mild conditions with up to 96% yield.

An egg-shell Pd/Al2O3 catalyst showed higher activity than a regular Pd/Al2O3 catalyst in the partial oxidation of methane to syngas, but a common problem of this reaction is the catalyst deactivation on stream. We attempted to modify the egg-shell catalyst via impregnation with some metal oxide additives. Although the addition of MgO did not show any beneficial effect, the addition of CaO and/...

The influence of catalyst support alumina-silica in terms of different Al2O3 to SiO2 mole ratios containing 20 wt.% Ni on the production of hydrogen and catalyst coke formation from the pyrolysis-catalysis of waste tyres is reported. A two-stage reactor system was used with pyrolysis of the tyres followed by catalytic reaction. There was only a small difference in the total gas yield and hydrog...

Pd nanoparticles (PdNPs) stabilized by methyl cellulose (MC) were synthesized in an aqueous solution, which are monodispersed nanoparticles. PdNPs/α-Al2O3 catalyst was prepared with monodispersed PdNPs and showed better catalytic performance than Pd/α-Al2O3 catalyst prepared by the incipient wetness impregnation method using Pd(NO3)2 as a precursor. The catalysts were characterized by transmiss...

Five monolithic catalysts with low noble metal content were prepared by immerge method (Pt/gamma-Al2O3, Pt/La-Al2O3, Pt/YSZ-Al2O3, Pt+Pd/La-Al2O3 and Pd/La-Al2O3) and their activity measurements were carried out in a conventional fixed-bed flow reactor. The results show that La-Al2O3 can promote activity of the prepared catalysts and can decrease the complete conversion temperature of cooking f...

The aluminum impregnated catalysts of Al-alumina (Al-Al2O3), Al-montmorillonite (Al-Mmn) and Al-activated charcoal (Al-AC) of various percent loadings were prepared by wet impregnation method and characterized by SEM, XRD and N2 adsorption/desorption (BET). The catalytic properties were investigated in the degradation of waste polystyrene (WPS). The results of catalytic degradation of Al metal,...

One of the main reactions that can be used to reduce greenhouse gases emissions is Reverse Water Gas Shift (RWGS) reaction. Through this reaction CO2 is converted to CO to produce beneficial chemicals such as methanol. In this paper Mo/Al2O3 catalyst was prepared and then promoted with Ni ions through impregnation method to produce Ni-Mo/Al2O3 catalyst. The structures of the catalysts were stud...

A series of ZnMgNiAl layered double hydroxides (LDHs) containing 20 wt.% Ni and different Zn/Mg molar ratios were prepared by a coprecipitation method, and then were introduced with H2PO4 via a microwave-hydrothermal method. With the resulting mixtures as the precursors, Zn/Mg-modified ZnMgNi–P/Al2O3 catalysts were prepared. The Zn/Mg molar ratio affected the formation of Ni2P and Ni12P5 in nic...