Low-shrinkage resin-based photocurable liquid crystalline epoxy nanocomposite has been investigated with regard to its application as a dental restoration material. The nanocomposite consists of an organic matrix and an inorganic reinforcing filler. The organic matrix is made of liquid crystalline biphenyl epoxy resin (BP), an epoxy resin consisting of cyclohexylmethyl-3,4-epoxycyclohexanecarbo...

Experimental data are reported on the elastoplastic response of and moisture diffusion through a vinyl ester resin–montmorillonite clay nanocomposite with various amounts of filler. Two simple models are developed for the elastoplastic behavior of a nanocomposite and for the anomalous diffusion of penetrant molecules. Adjustable parameters in the constitutive equations are found by fitting the ...

This study explains the influence of secondary filler on the dispersion of carbon nanotube (CNT) reinforced high density polyethylene (HDPE) nanocomposites (CNT/HDPE). In order to understand the mixed-fillers system, Montmorillonite (MMT) was added to CNT/HDPE nanocomposites. It was followed by investigating their effect on the thermal, mechanical and morphological properties of the aforesaid n...

Wind energy is one of the fastest-growing sources of electricity worldwide. The emergence of upscaling on the WT size results in research and development on new materials, especially for the WT blades, that will also fulfil the LP requirements. In the present work, graphene oxide (GO) will be utilised as a nanofiller for epoxy resin systems used as binding polymers or adhesives for CFRP compone...

We have prepared all-biopolymer nanocomposite films using lignin as a filler and cellulose triacetate (CTA) as a polymer matrix, and characterized them by several analytical methods. Three types of lignin were tested: organosolv, hydrolytic and kraft, with or without acetylation. They were used in the form of nanoparticles incorporated at 1 wt% in CTA. Self-supported films were prepared by vapo...

The aim of this study was to produce Carboxy Methyl Cellulose (CMC) and Poly Vinyl Alcohol (PVA) films and to enhance their properties by reinforcing them with nanoclay particles. Thus, nanocomposite films were prepared with blending of CMC and PVA, as a matrix and several filler loadings of nanoclay particles. The various formulations of nanocomposite films obtained with casting m...

We study the structural and dynamical mechanisms of reinforcement of a polymer nanocomposite (PNC) via coarse-grained molecular dynamics simulations. In a regime of strong polymer-filler interactions, the stress at failure of the PNC is clearly correlated to structural quantities, such as the filler loading, the surface area of the polymer-filler interface, and the network structure. Additional...

In this work the fracture toughness of epoxy resin has been improved through the addition of low loading of single part and hybrid nanofiller materials. Functionalised multi-walled carbon nanotubes (f-MWCNTs) was used as single filler, increased the critical strain energy release rate, GIC, by 57% compared to the neat epoxy, at only 0.1 wt% filler content. Importantly, no degradation in the ten...

Dynamics of attachment/detachment processes of chains to/from spherical fillers in a polymer nanocomposite is investigated by means of numerical simulations using a chemistry-specific model for the polymer. The effects of polymer-particle interaction, chain length, chain-to-filler distance, and filler radius on the attachment/ detachment processes are studied. It is found that the time a chain ...

Aprocedure for the production of carbon nanotube (CNT) reinforced poly(vinylidine difluoride) (PVDF) powders has been developed. These powders are versatile precursors for a range of nanocomposite materials. The morphology of the CNT/PVDF powder can be related to the interaction between filler and matrix, which depends on the degree of modification of the polymer with grafted maleic anhydride (...