We report a facile approach to preparing laponite (LAP) bioceramics via sintering LAP powder compacts for bone tissue engineering applications. The sintering behavior and mechanical properties of LAP compacts under different temperatures, heating rates, and soaking times were investigated. We show that LAP bioceramic with a smooth and porous surface can be formed at 800°C with a heating rate of...

BACKGROUND For the treatment of bone defects that exceed the critical size of the injury, several therapies have been investigated. Thermal decomposition method is suggested for extraction of natural hydroxyapatite bioceramic (HA). This technique in comparison with other methods of producing HA, has less complexity and greater economic efficiency. OBJECTIVE In the present study, a thermal dec...

Calcium Phosphate ceramic has been widely used in bone tissue engineering due to its excellent biocompatibility and biodegradability. However, low mechanical properties and biodegradability limit their potential applications. In this project, hydroxyapatite (HA) and calcium phosphate bioglass were used to produce porous tri-calcium phosphate (TCP) bioceramic scaffolds. It was found that porous ...

Bioceramic composites were obtained from chitosan and hydroxyapatite pastes synthesized at physiological temperature according to two different syntheses approaches. Usual analytical techniques (X-ray diffraction analysis, Fourier transformed infrared spectroscopy, Thermo gravimetric analysis, Scanning electron microscopy, X-ray dispersive energy analysis and Porosimetry) were employed to chara...

A nano-composite powder composed of silica and carbon with a unique property could be prepared from a mixture of a silicate compound and an epoxy compound, in which the silica within the nano-composite powder has a BET surface area of as high as greater than 800m2/g although the nano-composite powder has a BET surface area of less than 10m2/g. It was estimated that the silica and the carbon are...

objective(s): so far, extensive research has been conducted on the preparation and characterization of nano ceramics based on ca-si by sol- gel method and bioactivity was evaluated, but, a few researches have paid attention to the preparation of materials by mechanical activation (ma). the aim of this study was the preparation of akermanite nano powder by mechanical activation method and bioact...

This paper describes a rapid prototyping (RP) technology for forming a hydroxyapatite (HA) bone scaffold model. The HA powder and a silica sol are mixed into bioceramic slurry form under a suitable viscosity. The HA particles are embedded in the solidified silica matrix to form green parts via a wide range of process parameters after processing by selective laser sintering (SLS). The results in...

In this study, the comparative role of nano‐ and micro‐sized Cu powder in exploring the influence on the tribo‐performance of friction materials in the form of brake‐pads is discussed. Two friction composites were developed by keeping allthe ingredients constant and varying the size of the selected filler (copper powder). The developed micro‐composite contained 10 % ...

Nano-bioapatite (BAP) powder was successfully acquired from chicken femur bones via chemical treatment followed by calcination. The isolation of nano-bioapatite powder from chicken bone has not been published so far. The bioapatite powder was chemically and structurally characterized by elemental analysis (AAS), X-ray diffraction (XRD), transmission electron microscopy (TEM), and Fourier transf...