Following the Northridge earthquake of 1994, a significant number of steel moment resisting structural systems were damaged. Several studies have been conducted to improve the seismic performance of steel structures and specially their beam-to-column connections. One of the proposed connections for special moment-resisting frames included AISC-358 is Kaiser bolted bracket moment connection, bri...

After Northridge (1994) and Kobe (1995) earthquakes, several studies have been conducted to improve the seismic performance of steel structures. In this investigation, new steel moment-resisting connections (FSFN) developed by the authors, were studied by the non-linear numerical analysis. These connections were single-sided beam-to-column assemblies that are representative of exterior beam-to-...

moment-resisting frames have extensive usage in earthquake-prone areas and high ability in energy dissipation.after the earthquake in northridge 1994,kobe 1995 fixed connections of steel structures have shown poor performance and generally they were caught brittle fracture of beam flange weld to the column.in order to remedy to avoid similar situations in future earthquakes,researchers introduc...

analytical detection of cracking in connections of steel moment resisting frames using simple damage indices is important since these cracks are not visible unless the connections are uncovered. in this paper, applicability of three cumulative damage indices for detection of cracking in a cover plate welded moment connection is investigated. the damage indices considered in this study are based...

This paper describes an experimental investigation into the use of steel bars bonded into glulam timber beams with epoxy resins in order to provide moment-resisting joints between glulam beams and steel supports. The objective of this research was to provide information about the bending and shear strength of such connections. Past research has investigated the use of steel rods epoxy bonded in...

Precast concrete structures in Iran are generally designed as continuous columns with hinged beams, thereby making them simple frames. In this system in site show walls in two directions of buildings guaranteed lateral resisting system. However, in order to obtain a seismic resisting frame, the connection between beam and column should be moment resisting and ductile, allowing the formation of ...

In the last two decades, high-rise timber buildings have been built using glulam truss system, even with limited openings. Moment-resisting frames (MRTF) semi-rigid beam-to-column connections can be an architecture-friendly way to provide a load-carrying system vertical and horizontal loads for buildings. these structures, of adequate ductility are crucial ensure robustness energy dissipation. ...

Abstract. In the recent past, authors proposed a new steel device devoted to representing an innovative moment resisting connection for frame elements called LRPD (Limited Resistance Plastic Device). It is element characterized by symmetry with respect three orthogonal barycentric planes and constituted sequence of portions abrupt cross section changes, each one identifies suitably designed geo...

Moment-resisting frames have extensive usage in earthquake-prone areas and high ability in energy dissipation.After the earthquake in Northridge 1994,Kobe 1995 fixed connections of steel structures have shown poor performance and generally they were caught brittle fracture of beam flange weld to the column.In order to remedy to avoid similar situations in future earthquakes,researchers introduc...

Due to lack of the proper and well behavior of steel moment-resisting connections subjected to the great and major earthquakes, excessive researches have been conducted to mitigate the damages on the primary elements and connections. Therefore, elimination of residual drift and increasing the plastic rotation capacity for the connectors in the panel zone are required. The main purpose of this s...