mold powders used in the continuous casting of steel contain the harmful caf2 as a main substance developing toxic gases such as sif4 and hf at elevated temperatures. in this study, three samples of i1, i2 and i3, which contained gypsum free portland cement clinker with different percentages of fe2o3 (5.68, 6.83, 8.02 ) and f- (2.09, 1.06, 0), were prepared and their main characteristics were c...

mold powders are fluxing agents used as raw materials in the steel industry, which play very important role inprocessing stability and final surface quality of a product. surface quality depends particularly on the viscosity and the heat transfer of infiltrated mold flux between the mold wall and the solidified steel shell. heat flux across the interfacial gap depends on thermal properties of s...

the aim of conducting this research was to evaluate the viscosity change in the continuous casting of steel moldpowders by altering their chemical compositions, using hot stage microscope analysis. 4 low-fluorine samplescontaining such compositions as mno, fe2o3, li2o, tio2 and zno, as well as another fluorine-free samplecontaining a combination of fe2o3 and tio2, were prepared in this research...

In the conventional continuous casting of steel, either mold powder or oil can be added to lubricate the mold from sticking to the solidifying steel shell. The mold powder melts to form a molten slag or flux layer, and also acts to protect the molten steel from oxidation, to insulate the molten steel from heat loss, to absorb inclusions from the molten steel, to regulate heat transfer to mold w...

Results from mathematical models and plant experiments are combined to quantify the effect of transverse depressions and oscillation marks on heat transfer in the continuous casting mold. A heat transfer model has been developed to calculate transient heat conduction within the solidifying steel, coupled with the steady-state heat conduction with the continuous casting mold wall. The model feat...

Soy beans powder mixed with water is a good food for animals. However, there are two problems with this brew. One is that soy beans powder is sunk down to fast. Parts of soy beans powder are too big and too heavy. Animals do not eat soy beans powder because after a few minutes (around 3min) is sunk down and soy beans are on the bottom case. Another negative point is a quick growth of mold, espe...

For microfabrications of biochips with micro fluidic channels, a large number of microfabrication techniques based on silicon or glass-based Micro-Electro-Mechanical System (MEMS) technologies were proposed in the last decade. In recent years, for low cost and mass production, polymer-based microfabrication techniques by microinjection molding and micro hot embossing have been proposed. These t...

With the rapid development of economic, gypsum is widely used in casting and other industry areas. In this paper, the result is obtained that the performance of plaster mold is better when gypsum-water ratio is 0.5. If the composition of gypsum slurry mixture ( -hemihydrate, mullite powder, zirconium powder, reinforcing fibers) is mullite powder: zircon flour: enhancing fiber = 1:0.25:0.2:0.02-...

Mold powders are used as raw materials in continuous casting of steel industry; Also they are mostly composed of aluminum, calcium, silica oxides, alkaline and earth-alkaline oxides along with carbon and fluor. Two of the most important duties of mold powders are the lubrication of the space between mold walls and steel shell, and heat transfer control between steel shell and the copper mold. F...

This study is to develop a micromachining technology for a light guidepanel(LGP) mold, whereby micro dot patterns are formed on a LGP surface by a singleinjection process instead of existing screen printing processes. The micro powder blastingtechnique is applied to form micro dot patterns on the LGP mold surface. The optimalconditions for masking, laminating, exposure, and developing processes...