in the present work a two dimensional numerical investigation of steam flows in a turbine blade passage is performed. a finite volume approach has been used and the pressure–velocity coupling is resolved using the simple algorithm. the purpose of this paper is to find that one of the used turbulent models is better for this kind of studies. a structured mesh arrangement with boundary layer mesh...

the purpose of this paper is to studying nonlinear k-ε turbulence models and its advantages in internal combustion engines, since the standard k-ε model is incapable of representing the anisotropy of turbulence intensities and fails to express the reynolds stresses adequately in rotating flows. therefore, this model is not only incapable of expressing the anisotropy of turbulence in an engine c...

The purpose of this paper is to studying nonlinear k-ε turbulence models and its advantages in internal combustion engines, since the standard k-ε model is incapable of representing the anisotropy of turbulence intensities and fails to express the Reynolds stresses adequately in rotating flows. Therefore, this model is not only incapable of expressing the anisotropy of turbulence in an engine c...

A severe case of stenosis in coronary arteries results in turbulence in the blood flow which may lead to the formation or progression of atherosclerosis. This study investigated the turbulent blood flow in a coronary artery with rigid walls, as well as 80% single and double stenoses on blood flow. A finite element-based software package, ADINA 8.8, was employed to model the blood flow. The hemo...

Several rigorous turbulent models have been developed in the past years and it can be seen that more research is needed to reach a better understanding of their generality and precision by verifying their applications for distinct hydraulic phenomena; under certain assumptions. This survey evaluates the performance of Standard k-ε, Realizable k-ε, RNG k-ε, k-ω and RSM models in predicting flow ...

In this paper a new macroscopic k-ε model is developed and validated for turbulent flow through porous media for a wide range of porosities. The morphology of porous media is simulated by a periodic array of square cylinders. In the first step, calculations based on microscopic v2 − f model are conducted using a Galerkin/Least-Squares finite element formulation, employing equalorder bilinear ve...

Sensitivity measurements performed on EVLA antenna #14 show that the cold-sky zenith system temperature is about 45K for the 18 – 26 GHz band, and 60 K for the low frequency end of the 40 – 50 GHz band, rising to 95 K at the high frequency end. Efficiency measurements based on the planet Venus show the antenna efficiency to be about 50% in the 18 – 26 GHz band, and about 28% for the 40 – 50 GHz...

Characteristics of rotor blade tip clearance flow in axial compressors can significantly affect their performance and stable operation. It may also increase blade vibrations and cause detrimental noises. Therefore, this paper is contributed to investigate tip leakage flow in a low speed isolated axial compressor rotor blades row. Simulations are carried out on near-stall condition, which is val...

in this paper, a two-dimensional reynolds averaged navier-stokes (rans) model is developed to simulate the shoaling, breaking and overtopping of a solitary wave over a vertical breakwater. turbulence intensity is described by using a k turbulence closure model and the free surface configuration is tracked by volume of fluid (vof) technique. to validate the numerical model the simulation result...