in order to increase the efficiency of the conveyance of the granular solids, a new experimental set-up is designed. the test rig has longitudinal trapezoidal slots in its conveying pipes. through experimentation, a correlation for friction factor in terms of solid mass flow rate, fluid flow rate and froude number is presented. it is shown that the mixture friction factor for pipes with inner t...

In order to increase the efficiency of the conveyance of the granular solids, a new experimental set-up is designed. The test rig has longitudinal trapezoidal slots in its conveying pipes. Through experimentation, a correlation for friction factor in terms of solid mass flow rate, fluid flow rate and Froude number is presented. It is shown that the mixture friction factor for pipes with inn...

friction stir processing was applied for fabricating an aluminum alloy based hybrid nano composite reinforced with nano sized al2o3 and micro sized graphite particles. a mixture of al2o3 and graphite particles was packed into a groove with 1 mm width and 4.5 mm depth, which had been cut in 5083 aluminum plate of 10 mm thick. packed groove was subjected to friction stir processing in order to im...

frictional shear stress is usually determined by utilizing the coefficient of friction or the constant friction factor models. the present study deals with finite element analysis of double cup extrusion process to determine the relationship between constant friction factor (m) and coefficient of friction (µ), since the metal flow in this process is very sensitive to frictional conditions. ther...

Nanofluids are new heat transfer fluids, which improve thermal performance while reducing the size of systems. In this study, the numerical domain as a three-dimensional copper mini tube was simulated to study the characteristics of flow and heat transfer of CuO/H2O nanofluid, flowed horizontally within it. The selected model for this study was a two-phase mixture model. The results ...

Friction stir processing was applied for fabricating an aluminum alloy based hybrid nano composite reinforced with nano sized Al2O3 and micro sized graphite particles. A mixture of Al2O3 and graphite particles was packed into a groove with 1 mm width and 4.5 mm depth, which had been cut in 5083 aluminum plate of 10 mm thick. Packed groove was subjected to friction stir processing in order to im...

Friction fault diagnosis of rotating machinery based on acoustic emission (AE) technique is a research hotspot in recent years. The rotating machinery will produce multi-source noise during the operation process, so how to correctly identify the friction acoustic emission signals has become a key factor for accurate diagnosis of the fault. In this paper, it proposes a Gaussian mixed model (GMM)...

This paper presents an experimental research on the distribution of local friction factor, fb, and global friction factor, f, over the cross-section of a channel with V-shaped bottom, which typically occurs in sewers and culverts. Several series of experiments were conducted for measuring velocity and boundary shear stress. It is found that, Darcy-Weisbach, f, is more sensitive than other resis...

We compare the deformation patterns produced by sand and a sand mica mixture (14:1 ratio of sand to mica by weight) while simulating basin fill in extension and inversion models to analyze the potential of the sand mica mixture for applications that require a strong elasto-frictional plastic analogue material in physical models. Sand and the sand mica mixture have nearly equal angles of interna...

This paper presents the effect of friction on the performance of spark ignition engine using gas mixture as working fluid. The results were compared to frictionless engine. Engine parameters that were studied include equivalence ratio, engine speed, break mean effective pressure (BMEP), and cycle thermal efficiency. It was found for the frictionless engine operating at 6000 rev min and stoichio...