نتایج جستجو برای: Microstructure of sedimentation layer

تعداد نتایج: 21184315  

پایان نامه :وزارت علوم، تحقیقات و فناوری - پژوهشگاه مواد و انرژی - پژوهشکده سرامیک 1392

thermal barrier coatings (tbcs) are used to provide thermal insulation to the hot section components of gas turbines in order to enhance the operating temperature and turbine efficiency. hot corrosion and thermal shocks are the main destructive factors in tbcs which comes as a result of oxygen and molten salt diffusion into the coating. in this thesis atmospheric plasma spraying was used to dep...

In the present research, the aqueous suspensions of nano-sized YSZ particles were prepared using a common and available dispersant (Dolapix CE64) at different pH values and their stability were evaluated through the sedimentation height, viscosity measurement, and microstructural observation. Different amounts of dispersant were tested and the optimum percentage was examined by measuring the vi...

پایان نامه :وزارت علوم، تحقیقات و فناوری - دانشگاه رازی - پژوهشکده فنی و مهندسی 1388

asymmetric polyethersulfone (pes) microfiltration flat sheet membranes were composed by the phase inversion method (pim) and were used as supports. composite membranes were fabricated by coating silicone rubber as selective layer. effect of different concentrations of pes and pdms and different solvent such as nmp, dmf and dms effects as pes solvents and support thickness and different coagulat...

Journal: :iranian journal of science and technology (sciences) 2004
h. bidadi

in this experimental work, by using the method of plasma-chemical etching, we have dealtwith the causes of the creation of a distorted layer on the surface of silicon wafers during mechanicalmachining processes, in addition, the elucidation of connections between the structure of this layer andcharacteristic parameters of the mechanical strength of these wafers have been studied. experimentalre...

The present study investigated the effect of electrode composition and buffer layer on the microstructure and mechanical properties of H13 tool steel repair welds. Three specimens were welded applying two conditions; i.e. with and without stainless steel underlay. The microstructure of all weld metals contained the martensitic matrix with distributed chromium carbide precipitations. The microst...

The present study investigated the effect of electrode composition and buffer layer on the microstructure and mechanical properties of H13 tool steel repair welds. Three specimens were welded applying two conditions; i.e. with and without stainless steel underlay. The microstructure of all weld metals contained the martensitic matrix with distributed chromium carbide precipitations. The microst...

Functionally graded materials (FGM) in the form of layered structure consisting of yttria stabilized zirconia (8 mol% Y2O3) and nickel were fabricated by spark plasma sintering procedure. The relative density, linear shrinkage and Vickers hardness of each layer of graded materials were measured. The microstructure and the composition of these components were studied. The results obtained show t...

2016
Giacomo Russo

In the paper some results on the effects of chemo-physical evolution of clay-lime-water suspensions on the microstructure of a lime treated kaolin have been presented. A multi-scale investigation on the sedimentation behaviour of clay suspensions under different pore water chemistry has been developed highlighting the chemophysical mechanisms controlling particle arrangement and the soil fabric...

Journal: :international journal of nanoscience and nanotechnology 2012
m. tafazoly m. monirvaghefi m. salehi a. saatchi f. tabatabaei

ni-p and ni layers multilayer coatings were applied to az31 magnesium alloy utilizing electroless and electrodeposition procedures. the aim of the project was to decrease cracks and increase corrosion resistance of the coatings. in order to compare the coatings, the effect of single layer electroless ni-p coatings with different thicknesses was also investigated. the microstructure and phase co...

ARABI H., , MOHAMMAD-SADEGHI B., , RASTEGARI S., ,

In this research, effects of changes in aluminizing conditions on microstructure of Pt - aluminide coating applied oil a Ni - base superalloy GTD -111, has been studied. A thin layer (i.e.68,#mm ) of Pt was electroplated onto the surface of the .samples, and then they were aluminized by pack cementation technique under various conditions of time, temperature, rate of heating and pack powder com...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید