In this paper, an ultrasonic shear wave reflection method was adopted to mimic the microstructural evolution of hydrating Portland cement pastes with different water/cement-ratios (0.35, 0.5 and 0.6) cured under a constant temperature of 25°C. The reflection coefficient measured with this technique was correlated to microstructural parameters of the cement pastes. The application of numerical s...

The hot compression tests were carried on X45CrNiW189 valve steel (X45) in the temperature range of 1000– 1200 °C and the strain rate range of 0.004 – 0.5 s-1 in order to study the high temperature softening behavior of this steel. For the exact prediction of flow stress, the effective stress-effective strain curves were obtained from experiments under various conditions. On the basis of experi...

We consider the problem of microstructural evolution in binary alloys in two dimensions. The microstructure consists of arbitrarily shaped precipitates embedded in a matrix. Both the precipitates and the matrix are taken to be elastically anisotropic, with different elastic constants. The interfacial energy at the precipitate– matrix interfaces is also taken to be anisotropic. This is an extens...

The three dimensional (3D) microstructural evolution of A206 (AlCu4.5Mg0.3) and AlCu7 alloys is studied as function of solution treatment (ST) time by synchrotron tomography. 3D microstructural parameters of rigid phases such as volume fraction, interconnectivity (volume of biggest aluminide/total aluminide volume) and contiguity (touching surface) are presented. In situ synchrotron tomography ...

Atomic-scale control and manipulation of the microstructure of polycrystalline thin films during kinetically limited low-temperature deposition, crucial for a broad range of industrial applications, has been a leading goal of materials science during the past decades. Here, we review the present understanding of film growth processes—nucleation, coalescence, competitive grain growth, and recrys...

the flow stress of steel depends significantly on microstructural changes taken place during hot deformation processes. in hot deformation processes, the flow stress of steel is influenced by two main metallurgical phenomena, i.e. recovery and recrystallization, along with its chemical composition and thermo-mechanical parameters. the final mechanical properties of steel are also determined by ...

The microstructural evolution during low temperature ageing of two commercial purity alloys (Al1.2Cu-1.2Mg-0.2Mn and Al-1.9Cu-1.6Mg-0.2Mn at.%) was investigated. The initial stage of hardening in these alloys is very rapid, with the alloys nearly doubling in hardness during 20 h ageing at room temperature. The microstructural evolution during this stage of hardening was investigated using diffe...

Fe-Mn-C austenitic steels exhibit outstanding high-ductile deformation in their plastic regions along with significant microstructural evolution. In this study, to characterize the microstructural evolution during deformation of these steels, line-profile and texture analyses were carried out using X-ray diffraction. The convolutional multiple whole profile fitting procedure was used for a line...

the hot compression tests were carried on x45crniw189 valve steel (x45) in the temperature rangeof 1000– 1200 °c and the strain rate range of 0.004 – 0.5 s-1 in order to study the high temperaturesoftening behavior of this steel. for the exact prediction of flow stress, the effective stress-effectivestrain curves were obtained from experiments under various conditions. on the basis of experimen...

In this study, a magnetic-sensitive microcapsule was prepared using Fe 3O 4/poly(allylamine) (Fe 3O 4/PAH) polyelectrolyte to construct the shell. Structural integrity, microstructural evolution, and corresponding release behaviors of fluorescence dyes and doxorubicin were systematically investigated. Experimental observations showed that the presence of the magnetic nanoparticles in the shell ...