in order to gain a better understanding of the chemistry of methanl-to-hydro-carbon conversion, it is necessary to determine the nature of the primary reaction products. experiments carried out in this work on h-zsm-11, using a continuous flow reactor linked to an on-line gas chromatograph demonstrated that ethylene and methane are the primary reaction products. the results obtained using solid...

steam reforming integrated with oxidation of methanol was considered with numerical simulation. the parallel micro-channels with circular cross sections were used. because when the catalytic deposited inside the rectangular micro-channels, it fills up the edges. hence, the approximation of a cylindrical channel is appropriate. effect of this changing in cross section was considered and results ...

A novel atmospheric methanol measurement technique, employing selective gas-phase catalytic conversion of methanol to formaldehyde followed by detection of the formaldehyde product, has been developed and tested. The effects of temperature, gas flow rate, gas composition, reactor-bed length, and reactor-bed composition on the methanol conversion efficiency of a molybdenum-rich, ironmolybdate ca...

Steam reforming integrated with oxidation of methanol was considered with numerical simulation. The parallel micro-channels with circular cross sections were used. Because when the catalytic deposited inside the rectangular micro-channels, it fills up the edges. Hence, the approximation of a cylindrical channel is appropriate. Effect of this changing in cross section was considered and results ...

Continuous fixed-bed catalytic hydrogenation of ethylene carbonate (EC) to methanol and ethylene glycol (EG), an emerging synthetic process of methanol via indirect conversion of CO2, was successfully performed over Cu/HMS catalysts prepared by the ammonia evaporation (AE) method. The catalysts possessed superb performance with a conversion of 100% and a selectivity to methanol of 74%.

Methanol decomposition using a catalytic reactor with electric discharges was investigated in the present study. The methanol conversion at 190 °C was 58.0%; however, the methanol conversion increased by 65.9% under the electric discharge. An electric discharge produces high energy electrons with sufficient energy to break a C-OH bond.

the experimental studies of methane conversion to higher hydrocarbons and methanol using a dielectric barrier discharge (dbd) reactor are presented in this article. the process is carried out at ambient atmospheric pressure and temperature. the dbd reactor is stimulated by an alternative voltage of 50 hz and amplitude of max.23kv. the examination of the effect of voltage and flow rates on metha...

methanol steam reforming plays a pivotal role to produce hydrogen for fuel cell systems in a low temperature range. to accomplish higher methanol conversion and lower co production, the reaction was catalyzed by cuznfe mixed oxides. various ratios of fe and cu/zn were coprecipitated in differential method to optimize the cuznfe structure. the sample containing 45cu50zn5fe (wt. %) revealed its m...

msu-s mesoporous catalyst with [sio2]/[al2o3] ratio of 55 was synthesized using tetrapropylammonium hydroxide (tpaoh) as a structure directing agent and hexadecyltrimethylammonium bromide (ctab) as a surfactant. the catalytic activity of the calcined sample was evaluated for the dehydration of methanol to dimethyl ether (dme) in a vertical fixed bed microreactor at a weight hurly space velocity...

Photocatalytic conversion of carbon dioxide (CO(2)) to hydrocarbons such as methanol makes possible simultaneous solar energy harvesting and CO(2) reduction, two birds with one stone for the energy and environmental issues. This work describes a high photocatalytic conversion of CO(2) to methanol using graphene oxides (GOs) as a promising photocatalyst. The modified Hummer's method has been app...