نتایج جستجو برای: Metal-metal multiple bond
تعداد نتایج: 1012633 فیلتر نتایج به سال:
in this study, porcelain bond strength to three different alloys of gold-base, pd-ag and base-metal were compared and the effect of repeated porcelain sintering on bond strength was evaluated. the obtained results showed best bond strength of porcelain with gold-base alloy. pd-ag and base-metal alloys showed less strength respectively. during repeated sintering of porcelain, bond strength has n...
In this study, porcelain bond strength to three different alloys of Gold-base, pd-Ag and base-Metal were compared and the effect of repeated porcelain sintering on bond strength was evaluated. The obtained results showed best bond strength of porcelain with Gold-base alloy. Pd-Ag and Base-metal alloys showed less strength respectively. During repeated sintering of porcelain, bond strength has...
Background and Aim: Fractured metal-ceramic restorations may be repaired with composite in some cases to postpone the fabrication of a new restoration. Knowledge about the bond strength can help predict the success rate of this treatment modality. The aim of this study was to assess the effect of two types of mechanical surface treatment of metal along with the use of different adhesive systems...
AIM The aim of this study was to evaluate the effect of recasting base metal alloy on the metal-ceramic bond strength. MATERIALS AND METHODS A total of 60 test samples were prepared from new and recast nickel-chromium alloy and divided into six groups. In group A0, test samples were prepared from 100% new alloy. Groups A1, A2, A3, A4, and A5 were prepared from 50% new alloy and 50% casting re...
boron nitride semiconducting zigzag swcnt, $b_{cb}$$n_{cn}$$c_{1-cb-cn}$, as a potential candidate for making nanoelectronic devices was examined. in contrast to the previous dft calculations, wherein just one boron and nitrogen doping configuration have been considered, here for the average over all possible configurations, density of states (dos) was calculated in terms of boron and nitrogen ...
Objectives: Metal-ceramic restorations are the standard by which all esthetic restorations are measured. Fracture of dental restorations is a multifactorial problem, which is serious and costly. Debonding of porcelain from metal substructure and the bond strength depend on many factors. The purpose of this study was to determine whether or not the opaque porcelain thickness has a significant ef...
The formation of oxides on the surface of the metal are proven to contribute to the formation of strong bonding. However, The base metal alloys are expected to exhibit more oxidation than high gold alloys, increase in oxide layer thickness due to repeated firing in them can reduce the bond strength. The aim of this study was to compare the effect of repeated porcelain firing on the bond strengt...
introduction: evaluation of bonding in atomic level, by sem/eds analysis of si atoms, is an exact method for determination of bond strength of metal and porcelain. the purpose of this study was to evaluate the bond strength of one noble alloy and two base metal alloys with and without beryllium. methods and materials: six specimens of each alloy begostar, rexillium iii, wiron 99 (10×10×1mm dime...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید