PURPOSE The porcelain fused to gold has been widely used as a restoration both with the natural esthetics of the porcelain and durability and marginal fit of metal casting. However, recently, due to the continuous rise in the price of gold, an interest towards materials to replace gold alloy is getting higher. This study compared the bond strength of porcelain to millingable palladium-silver (P...

The flexural strength and flexural modulus of an experimental metal-resin composite, which used Ag-In alloy particle as the filler, were evaluated. The effect of acid treatment and heat treatment on the Ag-In alloy particle was investigated. The flexural strength of the experimental metal-resin composites ranged from 65.5 MPa to 91.0 MPa. The flexural strength of the metal-resin composite incre...

The aim of this study was to develop an effective primer to improve the adhesive property between all kinds of dental metal alloy and resin cement. To this end, we synthesized N,N'-dimethacryloylcystine (NDMCC) which had both disulfide functional group (to improve adhesion between precious metal alloy and resin) and carboxyl group (to improve adhesion between non-precious metal alloy and resin)...

in this study, porcelain bond strength to three different alloys of gold-base, pd-ag and base-metal were compared and the effect of repeated porcelain sintering on bond strength was evaluated. the obtained results showed best bond strength of porcelain with gold-base alloy. pd-ag and base-metal alloys showed less strength respectively. during repeated sintering of porcelain, bond strength has n...

Ultrathin 2D metal alloy nanomaterials have great potential applications but their controlled syntheses are limited to few noble metal based systems. Herein Ni x Co1-x alloy nanosheets with ultrathin (sub-3 nm) single-crystalline 2D structure are synthesized through a topochemical reduction method. Moreover, the optimized composition Ni0.6Co0.4 alloy nanosheets array exhibits excellent performa...

background and aim: an important criterion for success assessment of implant-supported prostheses is marginal fit. vertical and horizontal discrepancy can result in loosening of the prosthetic screw, crestal bone resorption, peri-implantitis and loss of osseointegration. despite careful attention to waxing, investing, and casting, marginal discrepancies are inevitable. the aim of this study was...

The aim of this investigation was to evaluate the metal-ceramic bonding of Au-1.6 wt% Ti alloy. Therefore, the coefficient of thermal expansion, modulus of elasticity, ceramic bonding strength, and hardness of Au-1.6 wt% Ti alloy were measured. The metal-ceramic interface was observed by EPMA to investigate its bonding mechanism. The Au-1.6 wt% Ti alloy showed a coefficient of thermal expansion...