This communication demonstrates the relevance of membrane sealing in a test cell to its performance. Membranes need to be sealed, and therefore a more or less signifcant (depending on the test cell design) peripheral part of the membrane is supported directly by the cell body (instead of a permeate spacer). Although it may seem that there should be no fltration through ...

in this study, the influence of the salts as an additive on the performance of the membrane was investigated and an extensive work was performed to optimize pvdf hollow fiber membranes through a response surface methodology (rsm). the prepared membranes were characterized by sem, contact angle and lep measurement. then, the rsm was used for the optimization of surface pore size, porosity and hy...

The total volume of water on Earth is circa 300 million cubic miles, with close to 98.0% being salt water and the remaining 2.0% fresh water. It has been increasingly more challenging to harvest fresh water from surface water, seawater and even from wastewater due to the combination of factors, viz. burgeoning population growth, rapid industrialization and climate change. Recently, membrane dis...

In this work, the effects of operative parameters on CH4, CO2, O2, and N2 membrane gas separation for poly (4-methyl-1-pentane) (PMP) membrane modified by adding nanoparticles of TiO2, ZnO, and Al2O3 are assessed and investigated. The operative parameters were type and percentage of nanoparticles, and cross membrane pr...

In this work, we successfully developed electromembrane extraction via preparation of an electrospun flat membrane based on device. The polyurethane-membrane was prepared by electrospinning method and used in EME. Affecting parameters on membrane preparation were optimized by Taguchi design. The developed method was used for extraction of phthalates as typical molecules and the proposed method ...

3D modeling of Pd/α-Al2O3 hollow fiber membrane by using computational fluid dynamic for hydrogen separation from H2/N2 mixture was considered in steady and unsteady states by using the concept of characteristic time. Characteristic time concept could help us to design and calculate surface to volume ratio and membrane thickness, and adjust the feed conditions. The contribution of resistance be...