نتایج جستجو برای: Membrane contactor

تعداد نتایج: 389501  

Journal: :journal of membrane science and research 0
zabih a. tarsa chemical engineering department, mahshahr branch, islamic azad university, mahshahr, iran s. ali asghar hedayat chemical engineering department, mahshahr branch, islamic azad university, mahshahr, iran masoud rahbari-sisakht chemical engineering department, gachsaran branch, islamic azad university, gachsaran, iran

in this research, process asymmetric polyetherimide hollow fiber membranes using ethanol (0, 2 and 4 wt%) as non-solvent additive in the polymer dope via phase inversion method were fabricated. aqueous solution of 1-methyl-2-pyrrolidine (nmp) (90%) was applied as a bore fluid to avoid inner skin layer formation and water was used as the external coagulant. the morphology of fabricated membranes...

2012
AZAM MARJANI

Extraction of heavy metals in membrane contactors was investigated theoretically in this study. Extraction of Cu2+ with a kerosene solution of di(2-ethylhexyl) phosphoric acid (D2EHPA) was studied. Simulations were performed using computational fluid dynamics of mass and momentum transfer in all subdomains of a circular membrane contactor. The membrane contactor consists of three sections: lume...

Journal: Gas Processing 2015

Porous surface modified polyvinylidene ï‌‚uoride (PVDF) hollow fiber membranes are fabricated through a dry-wet phased inversion process. Surface modifying macromolecules (SMM) (1 wt. %) are used as additives in the spinning dope. The performance of the surface modified membrane in contactor application for CO2 stripping from water is assessed through the fabricated gas–liquid membrane contacto...

In this study, polyphenylsulfone (PPSU) hollow fiber membrane was fabricated via a wet spinning method with the addition of ethylene glycol (EG) in the range of 0-10 wt% as the additive. The EG was added to improve the membrane pore formation and interconnectivity for better membrane contactor performance in extracting and removing the free fatty acid (FFA) from crude palm oil (CPO). Four diffe...

Journal: :journal of membrane science and research 0
nayef ghasem department of chemical & petroleum engineering, uae university, al-ain city, united arab emirates mohamed al-marzouqi department of chemical & petroleum engineering, uae university, al-ain city, united arab emirates

comin the present study, co2 removal from natural gas stream has been studied using a flat sheet membrane contactor. a three dimensional mathematical model is developed to describe the process. the model considers the transport of a gas mixture containing carbon dioxide and methane through a flat sheet membrane contactor module. the model is based on the non-wetted mode of operation, in which t...

2012
AZAM MARJANI SAEED SHIRAZIAN MAHMOUD RANJBAR MITRA AHMADI

Gas-liquid membrane contactors offer several practical advantages including high surface area per unit volume; independent control of gas and liquid velocities without any flooding, loading, weeping, or foaming, pre-determined gas–liquid interfacial area, membrane modules, capability of linear scale-up; low corrosion problems, and low operation and capital costs. Two common types of membrane co...

2013
Muhammad Saeed Liyuan Deng

Due to its non-dispersive contact, definite interface and high specific volume, a membrane contactor offers many advantages over conventional contactors. In recent years it has been established as a potential replacement for packed absorber columns in the field of CO2 capture. There are many different configurations in which a membrane contactor can operate, while tubular membrane with liquid i...

2017
Pengrui Jin Chuan Huang Jiaxiang Li Yadong Shen Liao Wang

The wetting of hollow fibre membranes decreases the performance of the liquid-gas membrane contactor for CO2 capture in biogas upgrading. To solve this problem, in this work, a poly(vinylidene fluoride) (PVDF) hollow fibre membrane for a liquid-gas membrane contactor was coated with a superhydrophobic layer composed of a combination of hydrophobic SiO2 nanoparticles and polydimethylsiloxane (PD...

Membrane contactor using amine based absorbents is an efficient technology for CO2 separation from gaseous mixtures. A novel porous polysulfone (PSF) flat membrane was prepared via non-solvent phase inversion method. The PSF membrane was modified by adding polyvinyl pyrrolidone (PVP) to the dope solution. The fabricated membrane was used in the serpentine flow field contactor module for CO2 abs...

2015
Miroslav Fikar

This work deals with membrane separation processes, their modelling and optimal control. A self-optimizing control is introduced, a method proposed by Johannes Jäschke (NTNU, Norway) to control heat exchanger network by controlling "Jäschke temperatures". This type of self-optimizing control is applied to control membrane processes, specifically membrane contactor network. This network consists...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید