the current study assesses the root causes of hydrogen blisters on low strength carbon steel equipment. for this purpose, some experiments including hardness test, non-destructive test (ndt), metallography, and fractograpghy are conducted. the microstructure of two blisters is assessed by means of optical microscopy and scanning electron microscopy (sem). the microstructural studies show that t...

from the time that civil engineers have used steel in building structures, they tried to increase its strength so as to produce more economic and lighter structures by using more elegant sections. increase of steel strength is not always useful for all members of a steel structure. in some members under certain conditions, it is needed to reduce the strength as much as possible to improve the b...

the quenching and partitioning (q&p;) process is a new heat treatment cycle to produce the third generation of advanced high strength steels based on diffusion of carbon from martensite to retained austenite phase. the application of this process for various steels leads to a remarkable combination of mechanical properties including high strength and good ductility. using this process in automo...

The current study assesses the root causes of hydrogen blisters on low strength carbon steel equipment. For this purpose, some experiments including hardness test, non-destructive test (NDT), metallography, and fractograpghy are conducted. The microstructure of two blisters is assessed by means of optical microscopy and scanning electron microscopy (SEM). The microstructural studies show that t...

structural steels with very high strength levels are often referred to as ultrahigh-strength steels (uhss). the usage of uhss has been extensively studied in aerospace industries and offshore platforms. in this study, medium carbon low alloy steel (ams6305) was thermomechanicaly treated to obtain an ultra-high strength bainitic steel for aircraft engine compressor disk. a novel themomechanical ...

advanced high strength steels (ahss) have recently attracted great attention because of their superior mechanical properties. a modern group of these steels, known as twinning induced plasticity (twip) steels, shows a unique combination of strength and ductility even at high rates of strain. in order to examine the functionality of such steels in dynamic loading conditions, their mechanical beh...

in this paper, an ultra low carbon high strength low alloy grade steel was subjected to a two-step forging processand this was followed by different post cooling methods. the highest strength was obtained at a faster coolingrate due to the highly dislocated acicular ferrite structure with the fine precipitation of microalloying carbides andcarbonitrides. at a slow cooling rate, the strength fel...

A microstructure consisting of ultrafine grained (UFG) ferrite with average grain size of ~ 0.7 µm and dispersed nano-sized carbides was produced by cold-rolling and tempering of the martensite starting microstructure in a low carbon steel. Subsequently, fine grained dual phase (DP) steel consisting of equiaxed ferrite grains with average size of ~ 5 µm and martensite islands with average size ...