impact is one of the most important subjects which always have been considered in mechanical science. nature of impact is such that which makes its control a hard task. therefore it is required to adopt a safe and secure mechanism for transferring the impact to other vulnerable parts of a structure, when it is necessary. one of the best methods of absorbing impact energy is using thin-walled tu...

experiments were carried out to observe the influence of loading type on concrete beam specimens. beam specimens made of similar concrete mixture with the same geometry were tested under three point static loading and low velocity drop weight impact loading. load – displacement behavior, absorbed energy dissipation capacity, stiffnesses, failure modes of beam specimens were obtained and discuss...

In condition monitoring of low speed rolling element bearings (REBs), traditional techniques involving vibration acceleration may not be able to detect a growing fault due to the low impact energy generated by the relative motion of the components. This study presents an experimental evaluation for incipient fault detection of low speed REBs by using an acoustic emission (AE) sensor and an acce...

Mechanical behavior of two-layer metal laminate structures under low-speed impact loading was investigated experimentally and numerically. The experimental results were just used for validation of numerical results. Then numerical modeling was used to study the behavior of metal laminates in details. The mechanical behavior of the metal laminate structures under impact loading was found to be d...

Joint loading has been implicated in the pathogenesis of knee osteoarthritis (OA). While compartment-specific measures such as the knee adduction moment have received much attention in the literature, less is known about other measures of dynamic loading in this patient population. This cross-sectional study assessed strength and walking patterns of 204 individuals with radiographically confirm...

fiber reinforced composites are widely used instead of traditional materials in various technological applications. therefore, by considering the extensive applications of these materials, a proper knowledge of their impact behavior (from low- to high-velocity) as well as their static behavior is necessary. in order to study the effects of strain rates on the behavior of these materials, specia...

Previous studies have demonstrated that the wear-corrosion synergism can be markedly affected by the loading speed. In this study, effects of the loading speed or strain rate on corrosion and corrosive wear of annealed, impact-fractured and slow bending-fractured surface layers of AISI 1045 steel in a 3.5% NaCl solution were investigated using electrochemical, scanning Kelvin probing and electr...

The capability to absorb energy, often called as toughness, is of importance in actual service conditions mesh reinforced composites, when they may be subjected static, dynamic and fatigue loads. Toughness evaluated under impact loads the strength. toughness materials are determined by two methods, (i) measuring deformation load, (ii) determining energy adsorption capacity load. Several methods...