fischer-tropsch synthesis is a promising route for production of light olefins via co hydrogenation over transition metals. co is one of the most active metals for fischer-tropsch synthesis. some different variables such as preparation parameters and operational factors can strongly affect the selectivity of fischer-tropsch synthesis toward the special products. in the case of preparation varia...

Silicoaluminophosphate (SAPO-34) molecular sieve doped with transition metals, Mn and Ni, with different molar ratios (Mn/Ni=0.33, 3) were investigated for their activity, selectivity and lifetime in biomethanol to olefins reaction. MnNiAPSO-34 nanostructured catalyst was synthesized by hydrothermal method and addition of metals was carried out by isomorphous substitution into the crystalline f...

Light olefins such as ethylene, propylene, and butylenes, are basic building blocks for petrochemicals. Further, these olefins are also useful for production of clean fuels such as alkylates – which have high octanes but no sulfur, olefins, and aromatics – or as octaneenhancers such as ethers. The conventional olefin production process is steam cracking of C2−C4 light paraffins from natural gas...

A visible-light-promoted chloramination of olefins is reported. N-Chlorosulfonamides serve as both nitrogen and chlorine sources. These reactions provide a simple, efficient, regioselective, and atom-economical method for the preparation of vicinal haloamine derivatives under mild reaction conditions. A variety of olefins were tolerated, and chloramination products were obtained in good yields.

current article describes application of zeolites in fluid catalytic cracking (fcc). the use of several zeolitic additives for the production light olefins and reduction of pollutants is described. application of zeolites as fluid catalytic cracking (fcc) catalysts and additives due to the presence of active acid sites in the zeolite framework  increase the formation of desired cracking product...

2,4,6-Triphenylpyrylium cation encapsulated within zeolite Y promotes highly selective transformation of olefins to ketones with molecular oxygen, under visible light (lambda > 400 nm) irradiation at room temperature.

Thermodynamic analysis of the cracking of hexane has been conducted by the Gibbs free energy minimization method and second law analysis of overall reactions. By-products have been divided into three groups of methane, alkynes and aromatics and their possible production paths have been discussed. Effect of operating conditions such as temperature and steam-to-hexane ratio on the cracking perfor...

The production of light olefins, as the critical components in chemical industries, is possible via different technologies. Fischer–Tropsch to olefin (FTO) process aims convert syngas olefins with high selectivity over a proper catalyst, reduce methane formation, and avoid excess CO2. This review describes through FTO using both unsupported supported iron-based catalysts. catalytic properties p...

Upgrading of cracked PFO (Pyrolysis fuel oil) for production of fuels, such as gasoline and light gasoil, was carried out in a semi batch reactor. Two different kinds of mesoporous and microporous catalysts, MCM-41 and ZSM-5, were used. Modification methods, such as ion exchange and impregnation with Fe and Ti, were done for tuning the acidity of the catalyst. XRD, FT-IR, and XRF analyzes were ...