نتایج جستجو برای: Layer-by-Layer deposition
تعداد نتایج: 7184319 فیلتر نتایج به سال:
thermal barrier coatings (tbcs) are used to provide thermal insulation to the hot section components of gas turbines in order to enhance the operating temperature and turbine efficiency. hot corrosion and thermal shocks are the main destructive factors in tbcs which comes as a result of oxygen and molten salt diffusion into the coating. in this thesis atmospheric plasma spraying was used to dep...
asymmetric polyethersulfone (pes) microfiltration flat sheet membranes were composed by the phase inversion method (pim) and were used as supports. composite membranes were fabricated by coating silicone rubber as selective layer. effect of different concentrations of pes and pdms and different solvent such as nmp, dmf and dms effects as pes solvents and support thickness and different coagulat...
zns/glass thinlayer in high vacuum condition and $40$ degree deposition angle has been produced by resistance evaporated method with $28$ nm thickness. cabin deposition temperature zns layer was about $50c$ and substrates were kept at room temperature. the atomic force microscopy (afm) and xrd analyses are perfectly accomplished for this layer.
In this study, the formation of the Al3Ti intermetallic compound at the junction interface of aluminum-titanium was investigated during deposition and annealing. The results illustrated that during the deposition process, one thin layer of Ti3Al2 intermetallic compound was created at the junction interface. During the annealing at 550 °C, this layer was transformed to the Al3Ti interm...
ZnS/glass Thinlayer in high vacuum condition and $40$ degree Deposition angle has been produced by resistance evaporated method with $28$ nm thickness. cabin deposition temperature ZnS layer was about $50C$ and substrates were kept at room temperature. The Atomic Force Microscopy (AFM) and XRD analyses are perfectly accomplished for this layer.
the suitability of three vapor deposition techniques for pore size modification was evaluated using polycarbonate track etched membranes as model supports. a feature scale model was employed to predict the pore geometry after modification and the resulting pure water flux. physical vapor deposition (pvd) and pulsed plasma-enhanced chemical vapor deposition (pecvd), naturally, form asymmetric na...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید