the aim of this project is to fabricated an aluminium-copper bimetal through the fusion method and examine its performance. an aluminium-copper-aluminium bimetal was built by the laser cladding method. the laser power as well as the annealing time effects on its interfacial properties of the bonding’s formed through the laser cladding were investigated. to fabricate the multilayer bimetal, the ...

Laser-diode heterostructures of InGaAlN containing a third-order diffraction grating for distributed optical feedback have been examined with transmission electron microscopy ~TEM! and scanning electron microscopy ~SEM!. The grating was defined holographically and etched by chemically assisted ion-beam etching into the upper GaN confinement layer of the laser structure. After the etch step, it ...

In this investigation, a laser cladding process with a powder feeding was used to deposit stainless steel 410L (high strength, excellent resistance to abrasion and corrosion, and great laser compatibility) onto railhead (higher strength, heat treated hypereutectoid rail grade manufactured in accordance with the requirements of European standard EN 13674 Part 1 for R400HT grade), to investigate ...

Stress in laser cladding coating is an important factor affecting the safe operation of remanufacturing components. Ultrasonic testing has become a popular approach in the nondestructive evaluation of stress, because it has the advantages of safety, nondestructiveness, and online detection. This paper provides a review of ultrasonic testing for stress in remanufacturing laser cladding coating. ...

In laser cladding, a material, usually in the form of powder, is deposited on a substrate. Powder particles are intermingled with inert gas and fed by a powder feeder system on the substrate. Laser is employed to melt the additive material and a small layer of surface of the substrate simultaneously. While the powder is being deposited, the laser melts the powder particles and the melted powder...

Laser cladding coating with wolfram carbide (WC) as enhanced particles can improve the performance of nickel-based materials. However, there still exists several problems, such serious element segregation and unequal distribution reinforcement phase. In order to mechanical properties further, IN718/WC coatings were prepared by ultrasonic vibration-assisted laser cladding. The effects vibration ...

Laser cladding is a well-established process to apply coatings on metals. However, on substrates considerably thinner than 1 mm it is only rarely described in the literature. In this work 200 µm thin sheets of nickel-based superalloy 718 are coated with a powder of a cobalt-based alloy, Co-28Cr-9W-1.5Si, by laser cladding. The process window is very narrow, therefore, a precisely controlled Yb ...