It is an effective way to improve the flexural behavior of reinforced concrete (RC) members by externally bonded carbon fiber reinforcement polymer (CFRP) laminates on the soffit of the members. However, there is little investigation on flexural performance of RC beam flexurally strengthened by side-bonded FRP laminates. To investigate the flexural behavior of RC beams side-bonded CFRP laminate...

The microcracking process in laminates which have outer-ply 90◦ plies (e.g. [90m/0n]s) has some important differences from the microcracking process in laminates which lack outer-ply 90◦ plies (e.g. [0n/90m]s). Foremost among the differences is the characteristic damage state. [90m/0n]s laminates form antisymmetric or staggered microcracks while [0n/90m]s laminates form symmetric microcracks. T...

BACKGROUND Biaxial (BX) and triaxial (TX) composite laminates with ±45° angled plies have been widely used in wind turbine blades. As the scale of blades increases, BX and TX laminates with shallow-angled plies (i.e. off-axis ply angle <45°) might be utilized for reducing mass and/or improving performance. The compressive properties of shallow-angled BX and TX laminates are critical considering...

A three-dimensional spectral element method SEM was developed for analysis of Lamb wave propagation in composite laminates containing a delamination. SEM is more efficient in simulating wave propagation in structures than conventional finite element method FEM because of its unique diagonal form of the mass matrix. Three types of composite laminates, namely, unidirectional-ply laminates, cross-...

Investigations on flexural and tensile properties of GFRP laminates influenced by stainless steel wire reinforcement were carried out as a novel approach. Plain GFRP laminates and GFRP laminates reinforced with stainless steel wires at different depth with various pitch distances were fabricated by hand layup method. The composite specimens reinforced with steel wires were exposed to low freque...

fiber metal laminates are hybrid laminates consisting of thin alternating bonded layers of aluminum and fiber/epoxy. arall (aramid aluminum laminate) and galare (glass fiber reinforced aluminum laminate) are specific kinds of fiber metal laminates that consist of thin aluminum sheets along with kevlar/epoxy and glass/epoxy composite layers, respectively. in this study, nonlinear tensile behavio...

As a well-known one-atom thick nanosheets with preeminent physicochemical properties, graphene and its derivatives (e.g., graphene oxide, GO) have shown great potential on the membrane separation filed. This paper presents an update of GO laminates developments, including the membrane preparation methods, physicochemical properties and water vapor transport of GO laminates, and their applicatio...

A finite element (FE) model is developed to investigate mode I delamination toughness of z-pin reinforced composite laminates. The z-pin pullout process is simulated by the deformation of a set of non-linear springs. A critical crack opening displacement (COD) criterion is used to simulate crack growth in a double-cantilever-beam (DCB) made of z-pinned laminates. The toughness of the structure ...

Mechanical properties of the fibers extracted from the areca are determined and compared with the other known natural fiber coir. Further these Areca fibers were chemically treated and the effect of this treatment on fiber strength is studied. Areca fiber composite laminates were prepared with randomly distributed fibers in Maize stalk fine fiber and Phenol Formaldehyde. Composite laminates wer...

This research paper compares the thermal conductivity and thermal expansion coefficients of glass fiber reinforced epoxy composite laminates (GFRP laminates) made using the Hand layup technique. The composite laminates were fabricated by filling with varying concentrations of fly ash, stone powder, aluminium oxide (Al2O3), magnesium hydroxide (Mg (OH)2), Silicon carbide particles(SiC) and hemat...