in the continuous gas lift operation, compressed gas is injected into the lower section of tubing through annulus. the produced liquid flow rate is a function of gas injection rate and injection depth. all the equations to determine depth of injection assumes constant density for gas based on an average temperature of surface and bottomhole that decreases the accuracy of gas lift design. also g...

A correlation based on the general form of cubic equations of state has been derived. This equation provides a convenient mathematical form of the Joule-Thomson coefficient in terms of the state variable V and T. The Joule-Thomson coefficient calculated by this correlation has been compared with experimental data. It has been shown that the Redilich-Kwang equation of state is a suitable equ...

joule-thomson cooling systems are used in refrigeration processes such as cryogenic gas liquefaction. although extensive studies have been carried out by researchers, most of them include cryogenic heat exchangers and their associated fields. in the current study, an attempt was made to indicate the effect of using inappropriate operational conditions in a cryogenic joule-thomson cooling system...

heat exchangers are the critical components of refrigeration and liquefaction processes. selection of appropriate operational conditions for cryogenic recuperative heat exchanger and expansion valve operating in joule-thomson cooling system results in improving the performance and efficiency. in the current study, a straightforward procedure is introduced to design an efficient joule-thomson co...

Depleted natural gas reservoirs are a promising target for Carbon Sequestration with Enhanced Gas Recovery (CSEGR). The focus of this study is on evaluating the importance of Joule-Thomson cooling during CO2 injection into depleted natural gas reservoirs. Joule-Thomson cooling is the adiabatic cooling that accompanies the expansion of a real gas. If Joule-Thomson cooling were extreme, injectivi...

Heat exchangers are the critical components of refrigeration and liquefaction processes. Selection of appropriate operational conditions for cryogenic recuperative heat exchanger and expansion valve operating in Joule-Thomson cooling system results in improving the performance and efficiency. In the current study, a straightforward procedure is introduced to design an efficient Joule-Thomson co...

in this work, we have calculated the joule-thomson inversion curve of two important associating fluids, namely water and methanol, from the saft equation of state. comparisons with the available experimental data, for water and methanol indicate that this molecular based equation of state gives good prediction of the low temperature branch; but, unfortunately, due to lack of isenthalpic data fo...

In this work, we have calculated the Joule-Thomson inversion curve of two important associating fluids, namely water and methanol, from the SAFT equation of state. Comparisons with the available experimental data, for water and methanol indicate that this molecular based equation of state gives good prediction of the low temperature branch; but, unfortunately, due to lack of isenthalpic dat...

Joule-Thomson cooling systems are used in refrigeration and liquefaction processes. There are extensive studies on Joule-Thomson cryogenic systems, but most of them coverage steady state conditions or lack from experimental data. In the present work, transient thermal behavior of Joule-Thomson cooling system including counter current helically coiled tube in tube heat exchanger, expansion valve...

Existence of a weak solution is established for the initial-boundary value problem for the system ff-iut-div(O(u)7u)+r(u)a(u)TuTv=a(u)]Tvl2,div(a(u)Vv)=O. The question of uniqueness is also considered in some special cases.