نتایج جستجو برای: Isotherm and kinetic models

تعداد نتایج: 16933979  

پایان نامه :وزارت علوم، تحقیقات و فناوری - دانشگاه تربیت مدرس 1382

‏‎the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...

In this work, zeolite 13X with porosity structure has been used as an adsorbent for adsorption of CO2 flue gas. The effect of operating conditions including pressure and time on adsorption capacity were investigated. The experiments conditions are constant temperature, the range of pressure 1 - 9 bar and the registration of adsorption capacity with passing of time. Experimental data were adjust...

Journal: :international journal of occupational hygiene 0
rohadin moradi-rad department of occupational health engineering, school of public health, tehran university of medical sciences, tehran, iran. leila omidi department of occupational health engineering, school of public health, tehran university of medical sciences, tehran, iran. hossein kakooei department of occupational health engineering, school of public health, tehran university of medical sciences, tehran, iran. farideh golbabaei department of occupational health engineering, school of public health, tehran university of medical sciences, tehran, iran. hamed hassani department of occupational health engineering, school of public health, tehran university of medical sciences, tehran, iran. rezvan abedin-loo department of occupational health engineering, school of public health, tehran university of medical sciences, tehran, iran.

the modeling of kinetic and isotherm curves acquired in adsorption of polycyclic aromatic hydrocarbons (pahs) as a model compound (phenanthrene) on activated carbons in the organic solvent. all the runs were carried out in a batch system at atmospheric pressure, process temperature of 24±2°c, and using the 100 ml phenanthrene in cyclohexan. this experimental work was mainly focused on the study...

پایان نامه :وزارت علوم، تحقیقات و فناوری - دانشگاه سیستان و بلوچستان 1390

a one dimensional dynamic model for a riser reactor in a fluidized bed catalytic cracking unit (fccu) for gasoil feed has been developed in two distinct conditions, one for industrial fccu and another for fccu using various frequencies of microwave energy spaced at the height of the riser reactor (fccu-mw). in addition, in order to increase the accuracy of component and bulk diffusion, instanta...

Journal: :journal of chemical and petroleum engineering 2013
mehri yahyaie hossein faghihian

in this research, adsorption of dibenzothiophene (dbt) as a model of sulfur containing material has been studied by pb exchanged y-zeolite under different experimental conditions. the adsorption was kinetically fast and high adsorption capacity was obtained. the equilibrium adsorption data were analyzed using langmuir and freunlich isotherm models. the corresponding parameters and correlation c...

The kinetics and isotherm studies of the immobilized lipase and the mechanism of immobilization on chitosan beads and activated chitosan beads with glutaraldehyde were investigated. The effect of glutaraldehyde on porosity of chitosan was evaluated by FESEM analysis. It was observed that the porosity of the carrier which has activated by glutaraldehyde was substantially increased. The validity ...

Journal: :iranian journal of chemistry and chemical engineering (ijcce) 2012
mohammad reza samarghandi mansur zarrabi mohammad noori sepehr reza panahi maryam foroghi

in this work, removal of c. i. acid red 14 was investigated by pumice stone as a low cost adsorbent. various parameters such as initial dye solution, contact time and ph were studied. removal of dye were increased by increasing of contact time and initial dye solution and deceased by increasing of ph. three isotherm models were studied. linear and non-linear regression analyses were used for de...

Journal: :journal of health sciences and surveillance system 0
mohammad ali baghapour department of environmental health engineering, school of health and nutrition, shiraz university of medical sciences, shiraz, iran babak djahed department of environmental health engineering, school of health and nutrition, shiraz university of medical sciences, shiraz, iran mojdeh ranjbar department of environmental health engineering, school of health and nutrition, shiraz university of medical sciences, shiraz, iran

background and objectives: activated carbon is an adsorbent which is mostly employed in order to remove dye from aqueous solutions; however, commercial activated carbon is expensive and this is considered as an obstacle for its usage. therefore, the present study aimed to use waste paper as an inexpensive precursor to produce activated carbon. materials and methods: in the present study, koh wa...

, ,

Zinc hydroxide chloride nanostructure was successfully synthesized through a simple method at low temperature by sonochemical process. The morphology and crystalline of the products were analyzed by XRD, FESEM and TEM. The effect of independent variables including contact time, solution pH, adsorbent dosage and the concentration of dyes on response performance with response to surface methodolo...

Journal: :international journal of bio-inorganic hybrid nanomaterials 0

in this study adsorption of 1-chloro-4-nitrobenzene (cnb) from aqueous solutions onto multi-walled carbon nanotubes (mwcnts) was surveyed. the effect of some key parameters such as ph (2-10), carbon nanotubes dosage (0.02-0.1 mg/250ml), cnb concentration (2- 16 mg/l), and temperature (20,30,40,50°c) were investigated. the results showed that, the variation of initial ph and cnb concentration ex...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید